Ebajarr.com

26/11/2025

07/08/2025

https://www.ebajarr.com/product/vcomin-fetal-doppler-fetal-ultrasound/

The Vcomin Fetal Doppler is a handheld, portable ultrasound device designed to detect and monitor the fetal heartbeat during pregnancy. Using safe and non-invasive ultrasound technology, it enables healthcare professionals and expectant mothers to listen to the baby’s heart sounds starting from as early as 8 to 12 weeks of gestation. The device features a clear digital display showing the fetal heart rate and delivers high-quality audio through built-in speakers or headphones. Its lightweight design and easy-to-use interface make it ideal for use both in clinical settings and at home, providing reassurance and important health information throughout the pregnancy journey.

Key Features:

Early Detection: Can detect fetal heartbeat from around 8 to 12 weeks of pregnancy.
Portable & Lightweight: Easy to carry and use anywhere—clinic or home.
Clear Digital Display: Shows real-time fetal heart rate (FHR) in beats per minute.
High-Quality Audio: Built-in speaker plus headphone jack for private listening.
User-Friendly Operation: Simple one-button start for quick and easy use.
Safe Ultrasound Technology: Non-invasive and safe for both mother and fetus.
Low Power Consumption: Long battery life for extended use.
Probe Compatibility: Comes with a high-sensitivity ultrasound probe for accurate detection.
Audio Recording (Optional): Some models support recording heartbeat sounds for playback or sharing.
Durable Design: Made with sturdy materials suitable for repeated use.

How to Use Vcomin Fetal Doppler Prepare the Device:

Make sure the device has fully charged batteries or fresh batteries installed.
Turn on the Doppler using the power button.

Apply Ultrasound Gel:
Apply a generous amount of ultrasound gel on the probe or directly on the lower abdomen of the pregnant woman.
The gel helps improve sound conduction for clearer heartbeat detection.

Position the Probe:
Place the probe gently on the abdomen where the fetus is likely located.
Usually, start near the p***c bone and slowly move upward or side to side if you don’t detect a heartbeat right away.

Listen for the Heartbeat:
After a few seconds, you should hear the fetal heartbeat through the built-in speaker or connected headphones.
The heart rate will also display on the screen in beats per minute (BPM).

Adjust Position if Needed:
Move the probe slowly and adjust the angle to get the clearest heartbeat sound.
It may take some patience, especially in early pregnancy or if the baby is moving.

Record or Note the Heart Rate:
If your device supports it, you can record the heartbeat sound.
Otherwise, note the displayed heart rate for your records.

Turn Off the Device:
After use, clean the probe with a soft cloth and medical disinfectant.
Turn off the Doppler to save battery.

Care Tips for Vcomin Fetal Doppler:

Clean the Probe After Each Use:
Wipe the ultrasound probe gently with a soft cloth dampened with a mild disinfectant or alcohol swab. Avoid harsh chemicals that might damage the probe surface.

Use Ultrasound Gel Properly:
Only use the recommended ultrasound gel during operation. After use, clean off any residual gel from the probe and device surface to prevent buildup.

Store Properly:
Keep the Doppler device and probe in a clean, dry place away from direct sunlight, dust, and moisture.

Avoid Dropping or Impact:
Handle the device carefully to prevent damage from falls or strong impacts.

Battery Maintenance:
Remove batteries if the device won’t be used for a long period to avoid battery leakage. Recharge rechargeable batteries as per the manufacturer’s instructions.

Check Cables and Connectors:
Regularly inspect cables and connectors for any signs of wear or damage and replace them if necessary.

Follow Manufacturer’s Instructions:
Always adhere to the specific care guidelines provided in the user manual to ensure safety and device longevity.

Benefits:

Early Monitoring: Allows detection of the fetal heartbeat as early as 8 to 12 weeks, giving early reassurance about fetal health.
Non-Invasive and Safe: Uses ultrasound technology that is safe for both mother and baby with no harmful radiation.
Portable and Convenient: Lightweight and easy to carry, enabling frequent monitoring at home or in clinics.
Emotional Comfort: Helps expectant mothers and families bond with the baby by hearing the heartbeat.
Quick and Easy Use: Simple operation means healthcare providers and even parents can use it without extensive training.
Real-Time Feedback: Provides immediate fetal heart rate information for early detection of potential complications.
Cost-Effective: Reduces the need for frequent hospital visits for routine heartbeat checks.
Supports Prenatal Care: Enhances routine prenatal checkups by providing additional fetal health data.

7,500.00৳ Original price was: 7,500.00৳ .6,300.00৳ Current price is: 6,300.00৳ .

Vcomin Fetal Doppler Fetal Ultrasound quantity
1

07/08/2025

https://www.ebajarr.com/product/saline-stand-with-wheel-description/
A Saline Stand with Wheel is a mobile IV fluid stand used to hold and suspend saline bottles or IV bags for patient treatment. It is typically made of stainless steel or chrome-plated metal for durability and hygiene. The stand features an adjustable-height pole, multiple hooks, and a stable base with smooth-rolling caster wheels for easy mobility between patient beds in hospitals, clinics, or home care settings. Designed for stability and convenience, it ensures safe and efficient delivery of fluids and medications to patients.

Key Features of Saline Stand with Wheel

Height Adjustable Pole – Allows easy height customization for patient comfort.
Durable Construction – Made from stainless steel or chrome-plated metal for long life and rust resistance.
Stable Base Design – Wide or weighted base to prevent tipping.
Smooth Mobility – Fitted with caster wheels for effortless movement.
Multiple Hooks – 2–4 hooks for holding saline bottles or IV bags.
Easy to Clean – Smooth, non-rusting surface for hygienic maintenance.

How to Use a Saline Stand with Wheel:

Adjust the Height – Loosen the height adjustment k**b, set the pole to the required height, and tighten it securely.
Hang the Saline Bottle/IV Bag – Place the bottle or bag onto one of the hooks at the top of the stand.
Position Near Patient – Roll the stand close to the patient’s bed or chair, ensuring the IV tubing reaches comfortably.
Connect the IV Line – Attach the IV tubing to the patient’s cannula as per medical instructions.
Lock the Wheels (if available) – Engage the wheel locks to prevent the stand from moving during use.
Monitor & Adjust – Check fluid flow regularly and adjust height if needed.

Care Tips for Saline Stand with Wheel:

Clean Regularly – Wipe the pole, hooks, and base with disinfectant after each use.
Inspect Before Use – Check for loose screws, hooks, or damaged parts.
Maintain Wheels – Remove dust, hair, or debris from caster wheels to ensure smooth movement.
Avoid Overloading – Do not hang more bottles or bags than the stand’s capacity.
Store Safely – Keep in a dry, clean place when not in use to prevent rust or contamination.
Tighten Fittings – Regularly check and secure adjustment k**bs and joints.

07/08/2025

https://www.ebajarr.com/product/ambu-bag/

Description:
An Ambu Bag, also known as a Bag Valve Mask (BVM), is a handheld, manual resuscitation device used to assist or replace spontaneous breathing in patients who are unable to breathe adequately on their own. It consists of a self-inflating bag connected to a face mask and a one-way valve system. When the bag is squeezed, it pushes air or oxygen into the patient’s lungs through the mask. The device is commonly used in emergency medical situations, during anesthesia, and in intensive care units to provide ventilation support until more advanced airway management can be established.

Key Features of Ambu Bag:
Self-inflating bag: Automatically refills with air after each compression, ready for the next breath.

One-way valve system: Ensures that exhaled air does not re-enter the bag, preventing contamination.

Soft, clear face mask: Provides a secure and comfortable seal over the patient’s nose and mouth.

Oxygen inlet port: Allows attachment to an external oxygen source for delivering higher oxygen concentration.

Multiple sizes available: Designed for use on infants, children, and adults.

Lightweight and portable: Easy to carry and use in emergency and field situations.

Durable and reusable: Made from medical-grade materials that can be cleaned and disinfected.

Transparent housing: Allows visual inspection of the valve and patient’s exhaled breath.

Ergonomic design: Facilitates ease of use with one hand or two hands during resuscitation.

How to Use an Ambu Bag:
Prepare the patient:

Lay the patient flat on their back.

Open the airway using the head tilt-chin lift maneuver (unless spinal injury is suspected).

Position the mask:

Place the mask over the patient’s nose and mouth.

Ensure a tight seal by pressing the mask firmly against the face with your thumb and fingers (using the “C-E” grip: thumb and index finger form a “C” around the mask, other fingers lift the jaw forming an “E”).

Ventilate:

Squeeze the bag steadily and slowly with one hand to deliver a breath.

Watch for the patient’s chest to rise, which indicates proper ventilation.

Release the bag to allow it to self-inflate and draw in air or oxygen.

Maintain rhythm:

Provide breaths at the appropriate rate:

Adults: 10-12 breaths per minute (one breath every 5-6 seconds).

Children and infants: 12-20 breaths per minute.

Monitor:

Continuously observe the chest for adequate rise and fall.

Check for signs of effective ventilation like improved color and pulse.

Adjust as needed:

If chest does not rise, reposition the mask or airway.

Ensure the bag is not squeezed too fast or too hard to avoid lung injury.

Benefits of Ambu Bag:
Provides immediate ventilation support: Helps patients who are not breathing or breathing inadequately to get oxygen quickly.

Simple and quick to use: Can be operated by trained healthcare providers and emergency responders without complex equipment.

Portable and lightweight: Easy to carry and use in a variety of settings, including ambulances, hospitals, and remote locations.

No need for electricity: Functions manually, making it reliable during power outages or in field emergencies.

Allows oxygen enrichment: Can be connected to an oxygen supply to increase the concentration of delivered oxygen.

Versatile sizes: Suitable for use on newborns, children, and adults.

Reusable and durable: Made from medical-grade materials that can be sterilized and reused, making it cost-effective.

Life-saving device: Critical for resuscitation during cardiac arrest, respiratory failure, or trauma situations.

Enhances airway management: Can be used as a bridge until advanced airway techniques (like intubation) are performed.

3,700.00৳ Original price was: 3,700.00৳ .2,700.00৳

07/08/2025

https://www.ebajarr.com/product/beurer-hearing-amplifier-ha-50/

📘 Description:
The Beurer HA 50 Hearing Amplifier is a compact, lightweight device that helps individuals with mild to moderate hearing loss by amplifying surrounding sounds. Designed for comfort and discretion, it can be worn on either ear and features an adjustable volume control for personalized hearing assistance. Its ergonomic build ensures a secure fit, making it suitable for everyday use in conversations, watching TV, or attending events.

🔧 Key Features:

Amplification up to 40 dB for clearer hearing.

Compact and ergonomic design for discreet, comfortable wear.

Adjustable volume control for personalized sound levels.

Low background noise for better sound quality.

Suitable for left or right ear use.

Lightweight construction for extended daily wear.

Powered by a standard button cell battery.

⚙️ How to Use (Beurer HA 50 Hearing Amplifier):

Insert the battery into the device following the polarity markings.

Place the amplifier over your ear, ensuring the earpiece fits comfortably in your ear canal.

Switch the device ON using the power control.

Adjust the volume gradually until you reach a comfortable hearing level.

Use in situations where you need sound amplification, such as conversations, TV watching, or public events.

Turn OFF the device when not in use to save battery life.

Safety and Care for Beurer HA 50 Hearing Amplifier:

Keep the device dry—avoid exposure to water, sweat, or humidity to prevent damage.

Store in a cool, dry place when not in use, away from direct sunlight or heat sources.

Clean the earpiece regularly with a soft, dry cloth to remove earwax and dirt.

Do not use harsh chemicals or water to clean the device.

Replace batteries promptly to avoid leakage that can damage the device.

Remove the battery if you won’t use the amplifier for an extended period.

Consult a hearing specialist if you experience discomfort, pain, or worsening hearing issues.

Do not share the device to maintain hygiene and prevent ear infections.

Benefits of Beurer HA 50 Hearing Amplifier:

Enhances hearing clarity for people with mild to moderate hearing loss.

Improves communication in everyday situations like conversations and watching TV.

Lightweight and comfortable for extended, discreet wear.

Easy to operate with simple volume control.

Cost-effective alternative to professional hearing aids.

Helps increase confidence and social interaction by reducing hearing difficulties.

Suitable for both left and right ear use.

1,200.00৳ Original price was: 1,200.00৳ .950.00৳

07/08/2025

https://www.ebajarr.com/product/beurer-hearing-amplifier-ha-50/

07/08/2025

https://www.ebajarr.com/wp-content/uploads/2025/08/download-2025-08-07T111104.670-fotor-enhance-20250807111150.jpg
The Star Dental X-ray system combines high-quality dental X-ray film with a monobath solution that simplifies and accelerates the image development process. This analog radiographic kit is designed for intraoral use and provides excellent image clarity, high contrast, and minimal radiation exposure. With a self-developing solution, dental professionals can process films quickly and conveniently without separate developer and fixer chemicals or complex equipment.

The films are D-speed, double-emulsion type, and come in soft plastic packets for added patient comfort. Ideal for routine dental diagnostics such as detecting cavities, root conditions, and periodontal issues.

🧰 How to Use Star Dental X-ray Film + Monobath Kit
📸 1. Prepare the Patient
Explain the procedure to the patient.

Position them comfortably.

Ask them to remain still during the X-ray.

📦 2. Insert the Film
Take one Star Dental X-ray film from the box.

Identify the convex dot on the packet – this side should face the X-ray source.

Place the film inside the patient’s mouth at the required position (bitewing, periapical, etc.).

⚡ 3. Take the X-ray
Adjust the dental X-ray machine.

Align it correctly with the film inside the mouth.

Take the X-ray as per standard radiographic exposure time (based on machine settings and patient size).

🧪 4. Develop the Film Using Monobath
Remove the exposed film from the mouth and open the packet.

In a darkroom or under a safelight, immerse the film into the monobath solution.

Gently agitate for around 2–3 minutes at 22°C (72°F). Follow the specific time/temp chart if provided.

🚿 5. Rinse and Dry
Rinse the film under clean running water for 30–60 seconds.

Let the film air-dry or use a drying cabinet if available.

🔍 6. Read and Interpret
Once dry, the film will show a clear, high-contrast image ready for diagnosis.

⚠️ Important Tips:
Always use clean monobath solution; discard if it becomes cloudy.

Maintain recommended room temperature; too hot or too cold affects image quality.

Use gloves while handling films to avoid contamination.

✅ Benefits of Star Dental X-ray Film + Monobath
🕒 Fast & Easy Processing

Monobath developer combines developing and fixing in one step — no need for multiple chemicals or machines.

💡 High-Quality Images

Produces sharp, high-contrast radiographic images ideal for accurate diagnosis.

🧴 Space & Cost Saving

No need for a full darkroom setup or separate developer/fixer chemicals.

📉 Reduced Radiation Exposure

D-speed high-sensitivity film requires less radiation compared to traditional systems.

😊 Comfortable for Patients

Soft, flexible plastic film packets reduce discomfort during intraoral placement.

🛠️ Convenient for Clinics

Quick turnaround helps clinics handle more patients efficiently.

🧼 Easy to Handle & Store

Long shelf-life and compact packaging make it simple to stock and manage.

💧 Minimal Water Use

Only a short rinse is needed after development, saving water.

4,000.00৳ Original price was: 4,000.00৳ .3,000.00৳

07/08/2025

https://www.ebajarr.com/wp-content/uploads/2025/08/download-2025-08-07T113230.564-fotor-enhance-20250807113351.jpg

3M ESPE Adper Single Bond Universal Adhesive is a light-cured, single-component dental adhesive designed for use in both direct and indirect restorative procedures. It offers universal compatibility with different etching techniques—self-etch, total-etch, and selective-etch—allowing clinicians flexibility and convenience in clinical protocols.

This adhesive bonds effectively to a wide range of dental substrates, including enamel, dentin, composites, zirconia, glass ceramics, metals, and amalgam, eliminating the need for multiple bonding agents or primers.

Its innovative formulation includes MDP monomer and silane, enabling strong chemical bonding and long-term durability. Additionally, the presence of Vitrebond copolymer enhances its performance under moist conditions and minimizes post-operative sensitivity.

🔑 Key Highlights:
Universal use in all etching modes

Bonds to virtually all dental materials

Single-step, one-coat application

Excellent marginal seal and bond strength

Moisture-tolerant and reduces sensitivity

No refrigeration required

This adhesive is especially suited for dentists who want a fast, reliable, and versatile bonding agent for most restorative cases with minimal technique sensitivity.

How to Use 3M ESPE Adper Single Bond Universal Adhesive

You can use this adhesive with self-etch, total-etch, or selective-etch techniques. Below is the general step-by-step guide for all modes:

🔹 1. Tooth Preparation
Clean the tooth surface.

Remove caries and shape the cavity as needed.

Rinse and gently dry the tooth (avoid over-drying if bonding to dentin).

🔹 2. Etching (optional based on technique)
Technique What to do
Total-etch Etch both enamel and dentin with phosphoric acid for 15 seconds. Rinse and gently air dry.
Self-etch No separate etching needed. Skip this step.
Selective-etch Etch only enamel with phosphoric acid for 15 seconds. Rinse and dry. Dentin is untouched.

🔹 3. Adhesive Application
Dispense: Shake the bottle well. Dispense a few drops into a clean mixing well.

Apply: Using a disposable applicator, scrub the adhesive onto the entire tooth surface for at least 20 seconds.

Air Dry: Gently air-blow for 5 seconds to evaporate solvent and create a thin, uniform film. Do not over-dry.

Light Cure: Cure with a dental curing light for 10 seconds.

🔹 4. Restoration Placement
Proceed with placing your composite, compomer, or indirect restoration as required.

⚠️ Tips for Best Results
Keep the bottle tightly sealed when not in use.

Do not touch the tip of the bottle to avoid contamination.

Always use in a clean, dry, uncontaminated field (isolation recommended).

Use Scotchbond Universal DCA if dual-cure resin materials are being used (for indirect restorations).

⚠️ Safety Guidelines for Using 3M ESPE Adper Single Bond Universal Adhesive
To ensure safe and effective use of the adhesive in clinical practice, follow these important safety precautions:

🧴 1. Avoid Skin and Eye Contact
The adhesive contains methacrylate monomers, which may cause skin or eye irritation.

Use gloves, protective eyewear, and face masks while handling.

In case of contact:

Skin: Wash immediately with soap and water.

Eyes: Rinse thoroughly with water and seek medical attention.

☢️ 2. Use in a Well-Ventilated Area
Vapors from the solvent (like ethanol or acetone) can be irritating when inhaled in large amounts.

Ensure proper air circulation in the operatory.

🔥 3. Keep Away from Heat and Flame
It contains volatile solvents, making it flammable.

Store away from open flames, heating elements, and sunlight.

🧪 4. Storage Safety
Store at room temperature (15–25°C).

Do not refrigerate or freeze.

Keep the bottle tightly closed when not in use to prevent solvent evaporation.

🚫 5. Avoid Cross-Contamination
Do not touch the applicator tip to the bottle or tooth.

Use a new disposable applicator for each patient.

👨‍⚕️ 6. For Dental Professional Use Only
This is a professional-grade material and should not be used by non-professionals.

Read the Manufacturer’s Instructions for Use (IFU) before application.

✅ Benefits of Using 3M ESPE Adper Single Bond Universal Adhesive
The 3M ESPE Adper Single Bond Universal Adhesive offers numerous clinical and handling advantages, making it a preferred choice for dental professionals worldwide:

🔹 1. Universal Use (All-in-One)
Compatible with total-etch, self-etch, and selective-etch techniques.

Eliminates the need to stock multiple adhesives—saves time, cost, and storage space.

🔹 2. Strong Bond Strength
Provides excellent adhesion to enamel, dentin, composites, glass ceramics, zirconia, and metals.

Long-lasting, reliable restorations with minimal risk of debonding.

🔹 3. Minimal Post-Operative Sensitivity
Formulated with Vitrebond Copolymer to reduce fluid movement and sensitivity.

Patients experience greater comfort after procedures.

🔹 4. No Primer Required
Bonds to substrates like zirconia, ceramic, or metal without separate primers.

Speeds up indirect restoration procedures (like crown or veneer cementation).

🔹 5. Moisture Tolerant
Works well on wet or dry dentin.

Reduces technique sensitivity and improves clinical success even in challenging situations.

🔹 6. One-Coat Application
Requires only a single layer and a short application time (approx. 35 seconds).

Makes chairside workflow faster and more efficient.

🔹 7. Long Shelf Life & Room-Temp Storage
Can be stored at room temperature for up to 2 years—no refrigeration needed.

Reduces material waste and improves convenience.

🔹 8. Compatible with All Light-Cured Materials
Works with composites, compomers, resin cements, and core build-ups.

7,800.00৳ Original price was: 7,800.00৳ .6,800.00৳

07/08/2025

https://www.ebajarr.com/product/nsk-nac%e2%80%91ec-contra%e2%80%91angle-handpiece/

The NSK NAC-EC is a contra-angle, low-speed surgical dental handpiece designed for precision, comfort, and durability. It is part of NSK’s EX Series and is engineered to fit E-type micromotors, making it highly compatible with a wide range of dental units.

Crafted with stainless steel construction and ergonomic design, the NAC-EC handpiece offers stable performance for general clinical use such as polishing, cavity preparation, finishing, and surgical procedures.

🔧 Key Specifications:
Model: NSK NAC-EC (EX Series)

Type: Contra-angle, low-speed handpiece

Drive Ratio: 1:1 direct drive

Rotation Speed: Up to 25,000–30,000 RPM (micromotor dependent)

Chuck Type: Latch-type, push-button bur release

Bur Size: Ø 2.35 mm (CA burs)

Material: Durable stainless steel body

Connection: E-type (ISO standard)

Sterilization: Autoclavable at 135°C (steam)

✅ Features:
Quiet and smooth operation with low vibration

Push-button latch head for quick bur changes

Lightweight and ergonomic for fatigue-free handling

Compatible with most micromotors using E-type coupling

Corrosion-resistant stainless steel surface

Designed for long-term clinical use

🧰 How to Use the Dental Surgical Handpiece (NSK NAC-EC)
✅ Step-by-Step Instructions:
Preparation
Ensure the micromotor unit is turned off before attaching the handpiece.

Clean and disinfect the handpiece (if not already sterilized).

Select a latch-type bur (2.35 mm) appropriate for the procedure.

Attaching the Handpiece
Align the E-type connector of the NAC-EC handpiece with your micromotor.

Push gently and twist to lock it securely into place.

Inserting the Bur
Press the push-button on the head to open the latch.

Insert the bur fully into the chuck.

Release the push-button to lock the bur in place.

Tug lightly on the bur to ensure it is securely held.

Operating
Turn on the micromotor.

Adjust the speed according to the procedure (max ~25,000–30,000 RPM).

Use steady and controlled motion while working on the patient.

Avoid applying excessive pressure to extend handpiece life.

After Use
Turn off the micromotor and remove the bur by pressing the push-button.

Detach the handpiece from the micromotor.

Rinse and clean thoroughly following sterilization protocol.

Sterilization
Clean external surfaces with alcohol wipes.

Lubricate if recommended by the manufacturer.

Autoclave at 135°C for 20 minutes (follow clinic protocol).

⚠️ Tips for Safe Use:
Always use recommended burs (CA burs, 2.35 mm).

Do not exceed speed limits of the handpiece.

Ensure the handpiece is properly lubricated and maintained to avoid overheating or failure.

Allow the handpiece to cool before sterilization.

⚠️ Safety Guidelines for Using the NSK NAC-EC Dental Surgical Handpiece
To ensure patient safety, handpiece longevity, and clinician protection, follow these safety tips:

🔒 Before Use:
Check for Damage

Inspect the handpiece for visible damage, worn parts, or loose connections.

Do not use if bur retention or head mechanism is faulty.

Use Compatible Equipment

Only use E-type micromotors and 2.35 mm CA burs.

Never force a mismatched bur into the chuck.

Sterilization

Always autoclave the handpiece before and after each use (135°C max).

Do not skip sterilization, even between uses on the same patient.

⚙️ During Use:
Speed Limit

Do not exceed 25,000–30,000 RPM, depending on the micromotor and procedure.

Avoid Overheating

Avoid prolonged use without breaks—heat buildup can cause tissue burns or damage the device.

No Excessive Force

Do not apply too much pressure—this may cause patient discomfort or damage internal gears.

Maintain a Steady Grip

Ensure you have a secure grip to avoid slipping or trauma to oral tissues.

🧼 After Use:
Cool Before Sterilizing

Let the handpiece cool down fully before autoclaving to prevent damage.

Clean and Lubricate

Follow NSK-recommended cleaning and lubrication procedures before sterilization.

Storage

Store in a clean, dry, and sterile environment to avoid contamination or rust.

🚫 Avoid:
Using without bur securely locked in place.

Submerging in liquids unless labeled waterproof.

Using with non-autoclavable components.

Operating with a damaged or malfunctioning micromotor.

✅ Benefits of Using the NSK NAC-EC Dental Surgical Handpiece
The NSK NAC-EC is a trusted dental contra-angle handpiece known for its reliability, efficiency, and ease of use—especially in procedures requiring precision and control.

🌟 Key Benefits:
High Compatibility
Designed with a universal E-type connector, making it compatible with most micromotors and dental units worldwide.

Smooth & Quiet Operation
Operates with low noise and minimal vibration, providing a comfortable experience for both dentist and patient.

Easy Bur Handling
Features a push-button latch system for quick, secure, and easy bur changes—saving time during procedures.

Durable Stainless Steel Body
Built to last with corrosion-resistant material that withstands repeated sterilization and regular clinical use.

Precision Control
Offers a 1:1 direct drive ratio and steady low-speed rotation, ideal for polishing, cavity preparation, and fine surgical work.

Autoclavable for Infection Control
Can be autoclaved at 135°C, meeting global hygiene standards and reducing cross-contamination risk.

Lightweight & Ergonomic
Designed for comfortable grip and handling, reducing hand fatigue during extended use.

Cost-Effective
Provides excellent value for clinics looking for a durable and versatile handpiece without the high price of high-speed turbines.

07/08/2025

https://www.ebajarr.com/product/woodpecker-uds-j-dental-ultrasonic-scaler-for-dental-clinic/
🦷 Woodpecker UDS-J Ultrasonic Scaler – Description
The Woodpecker UDS-J is an advanced ultrasonic scaler designed for effective and efficient dental cleaning procedures. Engineered with digital automatic frequency tracking, it ensures optimal scaling performance by maintaining consistent vibration frequency. The device is compact, lightweight, and user-friendly—ideal for general dental clinics and periodontal treatments.

Its handpiece is made from high-quality titanium alloy, making it autoclavable and durable for repeated sterilization. The scaler operates using a piezoelectric ultrasonic mechanism, offering precise and comfortable treatment for patients during calculus removal, plaque cleaning, and periodontal therapy.

This scaler is compatible with EMS-style tips and comes with multiple interchangeable scaling tips, suited for supragingival and subgingival cleaning. It supports both internal and external water supplies, and features a foot pedal for intuitive operation control.

🔧 Key Features:
💡 Automatic Frequency Tracking

Ensures consistent and optimal performance by automatically adjusting to the best working frequency.

⚙️ Digitally Controlled System

Offers stable power output with smooth vibration for effective scaling and comfortable patient experience.

🖐️ Autoclavable Handpiece

Made of high-quality titanium alloy; resists heat and pressure from autoclaving for repeated sterilization.

💧 Dual Water Supply Compatibility

Supports both internal and external water sources, allowing flexibility during operation.

🪥 Multiple Scaling Tips Included

Comes with 5 interchangeable tips suitable for scaling, periodontics, and endodontics.

🔌 EMS Compatible

Fully compatible with EMS-style tips and handpieces for greater versatility.

🎛️ Adjustable Power Output

Power range typically from 3–20W (varies by model/spec), allowing customization based on treatment needs.

👣 Foot Pedal Control

Allows hands-free operation for improved ergonomics and infection control.

🧱 Compact & Lightweight Design

Easy to install and use in any dental operatory without taking up much space.

🌊 Efficient Water Flow System

Provides adequate cooling to prevent overheating of the tip and improve patient comfort.

🧰 How to Use the Woodpecker UDS-J Ultrasonic Scaler
✅ 1. Setup and Preparation
Place the unit on a stable surface near the dental chair.

Connect the power cable to the electrical outlet (110–240V).

Attach the water line from the internal or external water source to the scaler.

Install the handpiece onto the main unit.

Choose and insert a scaler tip using the torque wrench provided.

Turn on the power switch on the unit.

💧 2. Adjust Settings
Use the control k**b or buttons to set:

Power level based on procedure type (low for gentle cleaning, higher for heavy calculus).

Water flow to ensure sufficient cooling of the tip during use.

🦷 3. During Operation
Press the foot pedal to activate the ultrasonic vibration and water spray.

Hold the handpiece like a pen and gently place the tip against the tooth surface.

Use light pressure and sweeping motions for:

Removing plaque

Breaking up calculus/tartar

Cleaning periodontal pockets (with appropriate tips)

🧼 4. After Use
Turn off the power and disconnect the foot pedal and handpiece.

Remove the tip and clean it using an ultrasonic cleaner or brush.

Sterilize the handpiece and tips in an autoclave.

Drain the water line and clean the unit surface.

⚠️ Important Tips:
Do not use heavy force—let the vibration do the work.

Ensure continuous water flow to avoid overheating.

Only use Woodpecker or EMS-compatible tips.

Always autoclave handpieces and tips between patients.

✅ Benefits of Woodpecker UDS-J Ultrasonic Scaler
🦷 Effective Plaque & Tartar Removal

Uses ultrasonic vibrations to efficiently remove dental calculus, plaque, and stains from tooth surfaces.

🌡️ Built-in Water Cooling System

Prevents overheating of the tip and tooth, enhancing patient comfort during treatment.

🛠️ Durable & Autoclavable Handpiece

Made from titanium alloy; can withstand repeated sterilization, ensuring hygiene and long-term use.

🎚️ Adjustable Power Levels

Allows customization of intensity for different procedures, from light cleaning to deep scaling.

⚙️ Automatic Frequency Tracking

Maintains optimal operating frequency automatically, ensuring consistent performance and safety.

💡 Easy to Use and Maintain

Simple interface, quick tip changes, and minimal maintenance make it user-friendly for dental staff.

💧 Dual Water Supply Compatibility

Flexibility to use internal or external water sources based on clinic setup.

👣 Hands-Free Operation

Foot pedal activation improves ergonomics and infection control during procedures.

🧳 Compact & Lightweight Design

Saves space in the operatory and is easy to install or move if needed.

💰 Cost-Effective Solution

Provides reliable performance at an affordable price, especially compared to other high-end scalers.

12,500.00৳ Original price was: 12,500.00৳ .10,000.00৳