Scolio Machines

Home
Scolio Machines

For more than 10 years we have been producing equipment and components for the prosthetic and orthop

15/11/2021

Scoliomachines joins the biggest event in Europe - Medica 21 fair in Dusseldorf, Germany. After corona virus lockdown we come back to international activity and are proud to present not only full range of equipment for orthopedic industry but also IT solutions for orthopedics.

To the attention of German colleagues and international customers we present 2 new apps developed by our company - one Scolio Scan that is available on appstore and designed to make 3D scan of patient's body and Scolio X-ray that can make the estimation of scoliosis curvature.

Also we are looking for the partners interested in co-operation for a distant production of individual orthopedic products with the use of CADCAM technology.

Please visit our stand from 15-18 of November 2021, hall 15, joint stand of St. Petersburg in Dusseldorf Messe.

02/08/2021

ISPO 2019 17th World Congress in Japan, Kobe. Scoliomachines shows CADCAM technology and visits the exhibition booths of the partners. On this video I am checking the self-learning ultimate hand prosthesis from Fillauer company.

02/08/2021

Scoliomachine takes part in business mission of Russian companies to Morocco. Meeting with possible future partners. We discuss CADCAM technology use in orthopedic production

23/06/2021

3D scanner

The 3D scanner is designed to take 3d measurements from patients for the manufacture of prosthetic and orthopedic products.

The 3D scanner is a lightweight, compact tool that fits onto an iPad tablet. The weight of the whole set is 450 grams. No cables are required in addition to the scanner, which gives you freedom and the ability to scan anywhere.

Due to the simplicity of the interface, a person working on a 3d scanner does not need special training. Captevia iPad app is used to create and save 3D scan files to iPad. The app is directly linked to the Rodin4D Neo software, so you can work with the scanned image right away. With Captevia, it is possible to send 3D files via email or Dropbox.

23/06/2021

Stand for casts
SC-C

Designed to fix a plaster positive on the pipe for subsequent processing. Has tilt angle adjustment. Mount type - desktop. Has 4 holes for M8 bolt.

23/06/2021

Oven for PrePreg technology size M
SC-O-M

The oven is designed for heating plastic sheets, for vulcanizing HTV-silicones, and can also be used for baking products under vacuum (PréPgeg technology), for performing technological processes for polymerizing powder paints.

The oven has a double-leaf door with double viewing windows. Heating of the working chamber is provided by air circulation passing through the heating elements; there are valves in the working chamber for connecting vacuum hoses. Connection to a third-party vacuum system is provided. The working area is made of mirrored stainless steel sheets. The cabinet provides illumination of the working area that can be switched on from the operator panel. A software PID controller is used to set a multi-stage temperature and time control program.

23/06/2021

Desktop socket router
SC-SR-MINI

Desktop socket router machine with tilt angle adjustment is designed for various types of processing of parts and assemblies of prosthetic and orthopedic products using such tools as: cutters, milling cutters, grinding cylinders and wheels, polishing wheels, etc.

The electric motor has a stepless speed control. Small-sized universal machines have a big advantage - they are compact and lightweight. In addition to the fact that it is a multifunctional equipment capable of performing a large number of different operations, they also take up very little space, thereby saving precious meters, while not at the expense of its versatility. Machines of this type are in demand both in the production of small-scale products and in small workshops, as well as in the manufacture and correction of products during field work.

23/06/2021

Three-axis milling machine
SC-MM-3

The milling machine has compact dimensions and allows even on a small area to process products from polyurethane foam blocks fixed on an axis.

High precision linear guides with automatic lubrication
Linear guides are designed for linear movement of units and parts of machine tools and various automated industrial complexes. All guides comply with international and European standards and are manufactured under continuous quality control - Smooth movement, quiet operation. The lubricator has a capillary lubricant distributor, thanks to which the lubricant is supplied in three directions and thus covers the rail and the rolling elements with the lubricant.

Set of protective covers for power lines
Provide protection of cables from external damage (protects against mechanical damage in case of falling off-site scraps), which increases the service life of the machine and increases the level of safety in production.

Complex control system
Includes a frequency converter, air preparation station, electronic components, I / O, low voltage devices and other equipment to ensure the joint coordinated operation of all machine elements.

Insulated instrument height sensor
The height sensor is triggered by the pressure of the cutter on the platform located on the pneumatic cylinder.

Description of machine operation

1. The spindle is in the home position to ensure smooth positioning of the workpiece
2. The operator in the working area of the machine sets and fixes the workpiece on the axis, and then sets the axis with the workpiece in the machine
3. The operator closes the door, selects the processing program
4. The safety loop is closed. The machine starts milling according to the selected program
5. After the end of the milling process, the spindle moves to its home position
6. The operator gains access to the working area of the machine and removes the finished product from the axis
7. The cycle repeats

In the event of an emergency stop or failure of the milling process, the program can be resumed from any point. Average processing time for one piece is 10 minutes.

23/06/2021

Oven for PrePreg technology XL
SC-O-XL

The oven is designed for heating plastic sheets, for vulcanizing HTV-silicones, and can also be used for baking products under vacuum (PréPgeg technology), for performing technological processes for polymerizing powder paints.

The oven has a double-leaf door with double viewing windows. Heating of the working chamber is provided by air circulation passing through the heating elements; there are valves in the working chamber for connecting vacuum hoses. Connection to a third-party vacuum system is provided. The working area is made of mirrored stainless steel sheets. The cabinet provides illumination of the working area that can be switched on from the operator panel. A software PID controller is used to set a multi-stage temperature and time control program.

23/06/2021

Hot bench TS-2
SC-HB-2

This hot bench is specially designed for working with large sheets of plastic. It is designed for uniform and gentle heating of sheets of low-pressure polyethylene (HDPE), as well as high-pressure polyethylene (LDPE), which is used in orthopedics and prosthetics in the production of corsets, apparatus, splints and other products.

The cover of the hot bench is mounted on gas springs, which ensures its easy opening and closing during operation. The hot bench is a flat heating surface covered with an anti-adhesive material in relation to plastic. The heat supply is one-sided, carried out by means of a heating element, due to which uniform heating of the material is achieved. Thanks to the movable top cover, materials of different thicknesses can be heated. The control unit provides regulation and viewing of the set temperature, as well as additional parameters. The hot bench is equipped with casters for easy movement

23/06/2021

LAMINATION VACUUM UNIT

The vacuum unit is used in the production of thin-walled sockets from cast resin or thermoplastic molding of polymers in the production of prostheses and orthoses.

The unit has two vacuum circuits with separate control with 6 sampling points. There are 3 taps at the sampling points to adjust the vacuum. All vacuum tapping points are equipped with filters.

The unit is equipped with two receivers inside. To collect condensate and moisture, the unit has a tank on each circuit with an alarm function and a warning signal when the tank is full, displayed on the touch screen. The vacuum parameters are controlled using a touch graphic screen.

Address

Stasovoy, 1B

Telephone

+79214064000

Website

http://en.scoliomachines.com/

Alerts

Be the first to know and let us send you an email when Scolio Machines posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Practice

Send a message to Scolio Machines:

Shortcuts

Want your practice to be the top-listed Clinic?

Country:

City:

15/11/2021

02/08/2021

02/08/2021

23/06/2021

23/06/2021

23/06/2021

23/06/2021

23/06/2021

23/06/2021

23/06/2021

23/06/2021

Address

Telephone

Website

Alerts

Contact The Practice

Shortcuts

Share