Foust Marketing, Inc.

02/27/2025

Griffco Air Release Valve

February 27, 2025 – The Woodlands, TX – The Griffco Air Release valve is used in a chemical feed system to remove the discharge pressure from the pump head to facilitate priming on start-up or degassing in the event of airlock. The priming valve is mounted on the upstream side of the back pressu...

02/25/2025

IPS—Weld-On® 724 CPVC Cement for Leak-Proof Joints

February 25, 2025 – The Woodlands, TX – Industrial and wastewater environments are very demanding with respect to the life expectancy of the piping connections. The need to withstand mechanical, thermal and chemical stresses in CPVC and PVC plastic piping systems necessitates greater joint stren...

02/18/2025

Mativ—Polypropylene Pipe for Pure Water Applications

February 18, 2025 – The Woodlands, TX – Mativ (Formerly Delstar) manufactures a complete line of Polypropylene pipe for pure water applications. Polypropylene pipe from is available in Schedule 40 and Schedule 80 pipe. Natural Polypropylene pipe available in sizes from 1/2” – 12” diameters...

02/13/2025

King PipeGrade®—The PE100 Special Black Polyethylene Sheet

February 13, 2025 – The Woodlands, TX – King PipeGrade® is a PE100 special black polyethylene sheet. It is the product of a proprietary process called K-Stran™, the most advanced manufacturing process for superior flatness and consistency up to 1-1/2” thick. It is also available in compress...

02/11/2025

The Blue Line - Volume 21, Issue 2
The Foust Marketing Newsletter

https://bit.ly/4hui6ps

01/30/2025

Lutz-Jesco—Priming Aid

What is it? — The Lutz-Jesco Priming Aid assists in the restarting of pump operation following extended times of pump shut down. It provides liquid to the pump head until chemical is lifted to the pump.

What does it do? — The special feature of the priming aid is the integrated pumping device that allows it to fill the priming aid without opening the collector.

What happens without it? — All brands of metering pumps with low flow rates often have difficulties in priming. With increased suction lift and viscosity of the medium these difficulties become more severe. Air pockets during startup or after exchanging the tank, as well as effervescent media, may also result in priming problems.

How does it work? — Priming is made much easier by using Lutz-Jesco priming aid because the metering head is fed directly with liquid. Any gas is collected in the priming aid. The metering process is not interrupted and cavitation is avoided.

Where does it go? — The priming aid consists of an easy-to-fill collector that is mounted between the suction line and the suction valve of the pump.

https://bit.ly/4fS3fn3

What is it? — The Lutz-Jesco Priming Aid assists in the restarting of pump operation following extended times of pump shut down. It provides liquid to the pump head until chemical is lifted to the pump. What does it do? — The special feature of the priming aid is the integrated pumping device th...

01/28/2025

Griffco Valve—Sight Flow Indicators

Enhance your chemical feed systems with Griffco’s Sight Flow Indicators. Their sight glasses provide a clear view of flow, ensuring optimal performance and safety. Elevate your system’s efficiency today.

☑️ Durable borosilicate glass construction for maximum clarity.
☑️ Reliable verification of chemical flow from your feed pump.
☑️ Versatile compatibility with 8 end cap materials, suitable for most chemicals.

Griffco Valve manufactures pump accessories to support all customer pump accessory requirements. These accessories complement their offering to better serve customers by providing the same quality, delivery, and customer satisfaction expectations.

https://bit.ly/40ciqSm

January 28, 2025 – The Woodlands, TX – Enhance your chemical feed systems with Griffco’s Sight Flow Indicators. Their sight glasses provide a clear view of flow, ensuring optimal performance and safety. Elevate your system’s efficiency today. ☑️ Durable borosilicate glass construction fo...

01/21/2025

NIBCO—Chemtrol® Flow Control Products

Chemtrol flow-control products are unsurpassed in performance and longevity. With more than 60 years of experience in industrial thermoplastics, Chemtrol offers dependable products that work in the most demanding corrosive environments. The line of quality Chemtrol® pipe, fittings, and valves are lightweight, corrosion resistant, and maintenance-free – saving you time and money.

Great ideas flow from Chemtrol in PVC, CPVC, PP, and PVDF products for a wide range of flow-control applications. For specific recommendations of chemical compatibility, view the Chem-Guide, and for engineering data related to plastic piping system design and installation, and maintenance instructions, view the Chemtrol Thermoplastic Piping Technical Manual.

https://bit.ly/3DOnO6L

January 21, 2025 – The Woodlands, TX – Chemtrol flow-control products are unsurpassed in performance and longevity. With more than 60 years of experience in industrial thermoplastics, Chemtrol offers dependable products that work in the most demanding corrosive environments. The line of quality ...

01/16/2025

Weld-On® 727™ Hot ‘R Cold™ For Extreme Cold
As a lot of the country is getting cold, please remember to stock your branches with Weld-On® 727 Hot ‘R Cold that is designed for extreme Cold conditions. This could generate some impulse incremental sales.

Weld-On® 727™ is a clear, ultra low VOC emission, medium bodied, very fast setting, PVC solvent cement for all classes and schedules. It is used for pipe and fitting with an interference fit, Schedule 40 through 6 inches diameter, and Schedule 80 up to 4 inches. Can be used without primer on non-pressure systems if local codes permit.

Premium formula for all weather conditions (-15°F to 110°F / -26°C to 43°C). Available in pints, quarts, and gallons. Suitable for use on rigid and flexible PVC pipe and fittings and can be used in very wet condition and/or where quick pressurization of the piping systems is needed. Excellent for industrial, irrigation, electrical conduit, pool & spa and plumbing, including PVC foam core pipe.

Contact our sales team to setup installation training for your next PVC and CPVC project.

https://bit.ly/4heq8lB

January 16, 2025 – The Woodlands, TX – As a lot of the country is getting cold, please remember to stock your branches with Weld-On® 727 Hot ‘R Cold that is designed for extreme Cold conditions. This could generate some impulse incremental sales. Weld-On® 727™ is a clear, ultra low VOC emi...

01/14/2025

The Blue Line - Volume 21, Issue 1
The Foust Marketing Newsletter

https://bit.ly/3C9hkyH

12/31/2024

We wish everyone a safe and prosperous New Year!
- Foust Marketing

12/24/2024

One of the real joys of the Holiday Season is the opportunity to say Thank You And to wish you the very best for the new year.
—Foust Marketing