03/14/2020
How To Turn Table Salt Into ‘MMS’ A Step By Step Guide
Information compiled by Alternative Health Science, LLC
www.AlternativeHealthScience.com
Alternative Health Science PO Box 50825 Henderson, NV 89016
Support@AHSPS.com
TABLE OF CONTENTS
1) A Brief History of MMS page 3.
2) How does Chlorine Dioxide work? page 4.
3) How to turn Table Salt (Sodium Chloride) into Sodium Chlorite page 5.
4) How to make a 28% Sodium Chlorite Solution page 7.
5) How to make a 50% Citric Acid Solution page 8.
6) How to Purify Water using Sodium Chlorite Page 8.
7) Protocol for Cleaning Fruits, Vegetables and Meats page 9.
😎 Protocol for Mouth and Gum Diseases page 9.
9) Protocol 1000 page 10.
10) Protocol 2000 page 11.
11) Precautions page 12.
2
“Knowledge is Power. In an emergency, knowledge can save your life, and the lives of loved ones.”
Chlorine Dioxide has so many uses including water purification, and people who follow Jim Humble’s research, it can be used for addressing everything from malaria, to infections, to cancer.
Most of us have heard the saying that harmful pathogens cannot live in an oxygen-rich environment. This is the environment created with the use of Sodium Chlorite. I have been using sodium chlorite (activated with citric acid) to create Chlorine Dioxide, since October of 2008.
Chlorine Dioxide was named “MMS” or “Miracle Mineral Supplement” by Jim Humble. Between 2001 and 2006, over 75,000 human volunteers have demonstrated the amazing ability of MMS to rid the body of virtually any and all viruses, bacteria, fungi, yeast, and toxins. A few doctors have begun to use MMS in their clinics claiming that MMS assists the immune system. It radically detoxifies the body in ways similar to other oxygen
therapies. MMS is not a ‘miracle’, it is just wonderful chemistry.
Chlorine Dioxide (CLO2) aka MMS. It is a water-soluble gas with an odor similar to that
of chlorine. Chlorine Dioxide was first used in the United States as a drinking water disinfectant in the 1940's. It is used around the world, but particularly in North America and Europe, where Chlorine Dioxide is used as a substitute for chlorine because it does not form carcinogenic trihalomethanes upon reaction with organic substances. Trihalomethanes are created in water that is contaminated with both fluoride and chlorine.
It is important to understand that Chlorine Dioxide and chlorine are not the
same. Similarly, Sodium Chloride (or table salt: NaCl) which also contains the chlorine atom, are not the same. Chlorine Dioxide is a natural mineral compound formed from chlorine with two oxygen singlet ions. It is the most abundant ion dissolved in ocean water and necessary to most forms of life.
Uses for Chlorine Dioxide include: water purification, oral hygiene, and more recently, oral and transdermal supplementation. Since the body is over 70% water, biological purification makes sense as well. Chlorine Dioxide may be the most effective “pathogen killer” known to nature. Most pathogens cannot develop a resistance to it, yet it does not destroy friendly intestinal flora or healthy cells.
BRIEF HISTORY OF MMS
3
HOW DOES CHLORINE DIOXIDE WORK
Oxidizing agents are chemical compounds that readily accept electrons from electron donors. Chlorine Dioxide oxidizes specific types of viral and bacterial structures through ion exchange. As though struck by lightening, viruses crumble, bacteria collapse and yeasts disintegrate. It neutralizes many toxins and other pathogens. Also heavy metals are oxidized, so that they can be more easily expelled from the body. To Chlorine Dioxide, all pathogens are electron donors.
Chlorine Dioxide provides about 260% more oxidation than chlorine, making it more effective than chlorine against viruses, bacteria, parasites, yeasts, molds, and
fungi. Pathogens that it has eradicated include: malaria, the cysts of giardia and Cryptosporidium, anthrax, MRSA, HIV, hepatitis A, B & C, typhoid, herpes, pneumonia, BSE (mad-cow disease), tuberculosis, Lyme disease, flu (including H5N1 “Bird Flu”) and various cancers. It has been able to alleviate conditions such as arthritis, asthma, scleroderma, leukoderma/vitiligo alopecia, autoimmune-related baldness, diabetes, MS, and other diseases considered ‘incurable’. These healing processes can occur relatively quickly - between a few hours and within a few weeks, but sometimes up to several months.
Perhaps the most surprising discovery is that once Chlorine Dioxide rids the body of pathogens, the body is able to heal itself rapidly. Pathogens rob the body of energy, poisoning us with their wastes, making the body more vulnerable to disease by attacking weakened areas. Pathogenic colonies can thrive on bone, heart valves, nerves or muscle and create acids that cause pain. They can shut off the nerve impulses even in the brain and prevent the flow of nutrients within the body.
A protocol has been developed whereby a solution of MMS can be taken orally. Properly dosed, this new treatment is tolerable orally, with only superficial side effects: diarrhea or vomiting.
The human body is an aerobic (oxygen) based system. Red blood cells, the normal carriers of oxygen throughout the body, do not differentiate between chlorine dioxide and oxygen. Therefore, after ingesting the MMS/chlorine dioxide-rich solution, red blood cells pick up chlorine dioxide ions.
Transported via red blood cells throughout the body, the chlorine dioxide ions will come in contact with pathogens, toxins, and heavy metals. All pathogens hold a negative ionic charge. Upon contact with a pathogen, it is rendered harmless due to the surrendering of its electrons to the chlorine dioxide, an electron acceptor. This releases energy. It is compatible with our healthy, life supporting, cells - but terminal for pathogens.
Since chlorine dioxide is a strong biologic-oxidizer, it will oxidize pathogens, most heavy metals, as well as diseased cells. Normal living cells are oxygenated, so ClO2 will not tear off electrons from them. Therefore, amazing as it might seem, when used correctly, the immune system can use this ‘killer’ to attack those anaerobic germs, bacteria, viruses, molds, and other microorganisms that are harmful to the body. It does not affect friendly bacteria, including the intestinal flora, nor healthy aerobic cells.
4
HOW TO TURN TABLE SALT (SODIUM CHLORIDE) INTO SODIUM CHLOITE
Difficulty: Moderately Challenging
Things you will need:
Safety goggles, Gloves, Glass beaker or heatproof wide-mouthed jar, 1/2 cup of table salt, 3 quarts of water, Heat source, 9-volt battery or solar panel with voltage greater than 1.5 volts, 2 pieces of electrical wire approximately 12 inches long with attached alligator clips at each end, 2 #2 pencils with erasers and metal holders removed, Pencil sharpener, Piece of cardboard that fits over the mouth of the jar, Electrical tape, Sharp knife, Coffee filter, Funnel, Heatproof plastic container, Wire rack.
Making Sodium Chlorite Step 1
Pour 3 quarts of water into a wide-mouthed, heatproof glass jar or glass beaker and heat to just under boiling.
Step 2
Add the 1/2 cup of salt to the water; continue heating the mixture until the salt is completely dissolved. Remove from heat when the salt is dissolved.
Step 3
Sharpen both ends of the pencils until you have at least 1 inch of exposed lead (i know its not lead anymore, point of reference is being the "center part" of the pencil), on both ends.
Step 4
Attach the wires to one end of each pencil with the alligator clip. Make sure the clip is only gripping lead.
Step 5
Tape the cardboard to the mouth of the glass jar or beaker.
5
Step 6
Punch holes in the cardboard an inch in from the sides of the jar. Insert the ends of the pencils without the alligator clips into the holes and push into the jar until the exposed lead is submerged in the salt/water mixture.
Step 7
Attach one alligator clip to the negative terminal and the other alligator clip to the positive terminal of the battery or the solar panel. This provides the electrolysis which turns the NaCl into NaClO2. Wait at least 16 hours before disconnecting the electrolysis.
Step 8
Disconnect the alligator clips from both the battery or solar panel and the pencils. Remove the pencils and cardboard from the glass jars.
Step 9
Line the funnel with a coffee filter and place in the plastic container. Pour the salt/water mix through the coffee filter-lined funnel. The Sodium Chlorite will be caught by the coffee filter.
Step 10
Remove the coffee filter from the funnel and gently place on a wire drying rack with the side that had the salt/water mix poured on it up.
Step 11
As the coffee filter dries, Sodium Chlorite crystals will form. You can gently scrape the crystals from the coffee filter into a storage container.
TIP: You can speed up the electrolysis process by keeping the salt/water mix warm.
6
HOW TO MAKE A 28% SODIUM CHLORITE SOLUTION
It is recommended that you make a small amount first to accustom yourself to this process. Please take caution while preparing this solution. Only prepare this solution in a well ventilated area – do not purposely inhale the vapors as it may irritate your lungs.
FOR SAFETY: Please be sure to LABEL your solution: “28% Sodium Chlorite Solution”.
To make different quantities (10 oz, a gallon, etc..): With your calculator, weigh the amount of water you are using, then multiply by 28% (0.28) – that is the weight of Sodium Chlorite Flakes you will use to make the solution.
DO NOT USE METAL CONTAINERS OR METAL STIRRING UTENSILS
To prepare (1) 4 oz. bottle of 28% Sodium Chlorite Solution (Water Purification Drops)
Step 1
In a glass measuring cup: Add 4.2 oz. by weight (approx. 1/2 of a cup by volume) of warm R/O or distilled water (approximately 120 to 140 ̊ F).
Step 2
Slowly stir in 1.2 oz of the sodium chlorite flakes. Stir with a non-metallic spoon to help dissolve the Sodium Chlorite Flakes (will take about 5-10 minutes), and then cover (for darkness).
Step 3
Let the solution sit for 3 hours or more. Expect some particles to fall to the bottom.
Step 4
Pour the contents slowly into the dark colored 4 oz. bottle, for storage, and future use. Leave un-dissolved particles in the bowl, discard them.
7
HOW TO MAKE A 50% CITRIC ACID SOLUTION
It is recommended that you make a small amount of the citric acid solution, as needed – enough that you would use within 1 month, to ensure quality.
Please be sure to LABEL the bottle you use to store this solution as “50% Citric Acid”
How to Prepare (1) 4 fl.oz. bottle of 50% Citric Acid Solution Step 1
Place 2 ounces (4 level tablespoons) of citric acid crystals into the 4 fl.oz. bottle - use paper to fold into a funnel if needed.
Step 2
Fill the 4 fl.oz. bottle to the top of the bottle just before the curve, leaving about a half inch from the very top to prevent leakage (2 fl oz of water is about 1⁄4 cup). This works best with warm water – approximately 110 ̊F.
Step 3
Shake the bottle to help dissolve the citric acid crystals into the water
The remaining citric acid crystals can be stored in a cool dry location or placed in the freezer for extended storage, and will store for 1 – 1 1⁄2 years.
HOW TO PURIFY WATER WITH SODIUM CHLORITE OR CHLORINE DIOXIDE
1) Mix 8 drops of Sodium Chlorite Solution in 1 gallon of water then wait 12 hours before drinking.
OR:
2) Mix 2 drops of Sodium Chlorite Solution with 2 drops of 50% Citric Acid Solution, wait 30 seconds then add to 1 gallon of water, and wait 15 minutes before drinking.
8
PROTOCOL FOR CLEANING FRUITS, VEGETABLES AND MEATS
This cleaning process removes fungus, bacteria, etc through an oxygenating process. Add 12 drops of sodium chlorite solution to 1 gal water. Or: 2 drops of activated sodium chlorite solution.
Do each group individually and with new soak water each time.
leafy veggies - 5-10 min
root - heavy fiber veggies 10-15 min - beans/grains may also be soaked thin skinned fruits (berries) -5 min
medium skinned fruits - 10 min
thick skinned fruits -10-15 min
citrus fruits and bananas - 15 min
eggs 20-30 min - gets rid of salmonella
meats/poultry/fish thawed - 10 min
meats/poultry/fish frozen15-20 min [can remain in the soak until thawed] Rinse in fresh water for 5-10 min. Drain. Then store.
There are many other protocols for using this product for: oral hygiene, internal consumption (for diseases, infections and parasites), transdermal application, bathing, e***a, do**he, deodorizing, burns and sunburns, protocols for children and infants, IV applications, skin infections like MRSA or Staph and even ‘maintenance’ protocols for preventative measures – all of these protocols can be found at www.jimhumble.biz
And a website that has a list of diseases one many consider using MMS and the protocol to follow can be found at genesis2church.org/mms-protocol-list.html such as:
PROTOCOL FOR MOUTH AND GUM DISEASES
Mouth and gum diseases respond promptly to MMS. Just make up a 10 drop dose of MMS. Take 10 drops and add 10 drops of the 50% citric acid solution, wait 30 seconds, then add about 1/2 glass of water (4 ounces). Use a soft bristle toothbrush and pour the liquid onto the brush and brush your teeth and gums very well. Be gentle at first. Do this 3 or 4 times a day for the first three or four days. Then, do it twice a day until everything is totally cleared up... Use the extra solution to rinse and gargle your mouth. Do this slowly so that some of the Cl02 gas has time to simmer out of the liquid. The invisible Cl02 gas will kill all the germs and bacteria in your mouth without harming sensitive gums or sore places on the tongue. Then for a few weeks brush your teeth at least once a day with the MMS solution. Your mouth should be in much better condition after one week, but it will
9
continue to improve for several weeks before it gets to the condition of being a lot healthier than ever before. You can then cut back to two or three times a week.
PROTOCOL 1000
Take 3 drops of activated MMS each hour, for 8 hours a day, for 3 weeks. However many people cannot start taking that many drops and should start with only 2 or even 1 drop an hour. This is determined by how sick they are to begin with. If one is feeling very sick then start with 1 drop an hour or even 1/2 drop and hour, but then begin taking more if you feel that you can. The rule is, if you feel that the drops are making you feel worse, take less and if they are not making you feel worse then take a little bit more the next hour, but never more than 3 drops an hour.
The way you accomplish activation can be done in 4 different ways, any one of these methods of activation is acceptable: First, add your number of MMS drops to a clean dry glass, then activate as follows:
(1) (preferred method) add 1 drop of 50% citric acid for each drop of MMS that is in your glass, swirl or shake to mix, wait 20 seconds, add 1/2 to 1 glass of water or juice and drink. (2) add 5 drops of 10% citric acid for each drop of MMS in the glass, and then shake or swirl to mix, wait 3 minutes, add 1/2 to 1 glass of water or juice and then drink.
(3) add 5 drops of vinegar for each drop of MMS in the glass, shake or swirl to mix, wait 3 minutes, add 1/2 to 1 glass of water or juice and then drink.
(4) add 5 drops of full strength lemon juice for each drop of MMS in the glass, shake or swirl to mix, wait 3 minutes, add 1/2 to 1 glass of water or juice and then drink.
Do not use orange juice. Do not use juices with added vitamin C or ascorbic acid added. Do not use concentrated juices that must have water added to them. Fresh juices are best.
But if you don't want to make up a single dose each hour, you can make 8 doses in the morning, and keep the solution in a closed container all day. Just follow the above instructions multiplying all the figures by 8 and then put that liquid in a closed container. Take 1/8th of it each hour. Don't worry the MMS will last hours longer than is needed.
Now, these are the important instructions you must be sure to follow: You must not make yourself sicker than you already are: Do not cause yourself a lot of nausea, or pain, or diarrhea. When you notice any of these symptoms coming on take less MMS. Try not to stop taking MMS, just take less. Go from 2 drops an hour of activated MMS to one drop an hour. Or if you are already take only one drop an hour, then take 1/2 drop and hour, or even 1/4 drop an hour. Do not cause yourself diarrhea if you can avoid it by taking less MMS. Pain, diarrhea, nausea and other discomforts cause loss of energy, which in turn causes slower healing and slower recovery. On the other hand try to increase the amount of drops you are taking until you are taking 3 drops an hour, but do not go over 3 drops an hour. CONTINUE THIS UNTIL YOU ARE WELL.
Here is how you carry your 8 hour dose with you instead of having to activate it hourly.
10
Take a liter bottle, divide it into 8 equal parts. Mix 24 drops of MMS and 24 drops of 50% citric acid. Swirl or mix for about 20 seconds. Fill the bottle with water and you will have a 3 drops of MMS activated per line taken hourly.
PROTOCOL 2000
This protocol is for cancer and other life threatening diseases. It basically is taking as many drops of activated MMS each hour as a person can take without becoming any sicker, or feeling worse, or developing diarrhea. It must be done for 10 hours a day, for 3 weeks, or until well. It is best to start off with only one drop an hour and quickly build up to as many drops as you can take, again let me say: without feeling worse. Remember all drops must be activated as given below. Please take this to heart, do not make yourself sicker than you already are. Take as many drops as you can, but be comfortable; making you sicker uses up energy and makes the recovery go slower.
The way you accomplish activation can be done in 4 different ways, any one of these methods of activation is acceptable: First, add your number of MMS drops to a clean dry glass, then activate as follows:
(1) (preferred method) add 1 drop of 50% citric acid for each drop of MMS that is in your glass, swirl or shake to mix, wait 20 seconds, add 1/2 to 1 glass of water or juice and drink. (2) add 5 drops of 10% citric acid for each drop of MMS in the glass, and then shake or swirl to mix, wait 3 minutes, add 1/2 to 1 glass of water or juice and then drink.
(3) add 5 drops of vinegar for each drop of MMS in the glass, shake or swirl to mix, wait 3 minutes, add 1/2 to 1 glass of water or juice and then drink.
(4) add 5 drops of full strength lemon juice for each drop of MMS in the glass, shake or swirl to mix, wait 3 minutes, add 1/2 to 1 glass of water or juice and then drink.
But if you don't want to make up a single dose each hour, you can make 10 doses in the morning, and keep the solution in a closed container all day. Just follow the above instructions multiplying all the figures by 10 and then put that liquid in a closed container. Take 1/10th of it each hour. Don't worry the MMS will last hours longer than is needed so long as you keep the lid on tight.
Now, these are the important instructions you must be sure to follow: You must not make yourself sicker than you already are: Do not cause yourself a lot of nausea, or pain, or diarrhea. When you notice any of these symptoms coming on take less MMS. Try not to stop taking MMS, just take less. Go from 2 drops an hour of activated MMS to one drop an hour. Or if you are already take only one drop an hour, then take 1/2 drop and hour, or even 1/4 drop an hour. Do not cause yourself diarrhea if you can avoid it by taking less MMS. Pain, diarrhea, nausea and other discomforts cause loss of energy, which in turn causes slower healing and slower recovery. On the other hand try to increase the amount of drops you are taking until you are taking as many drops an hour as you can without feeling worse, but do not go over 12 drops an hour.
11
PRECAUTIONS
Carefully follow instructions.
Do not ingest product at full strength.
Avoid prolonged contact with skin.
Keep out of direct sunlight. Discard properly if left in direct sunlight for prolonged periods of time.
Wipe up spills and rinse wipe cloth with plenty of water.
Do Not Use if Sodium Chlorite solution turns cloudy.
Use only in glass or plastic containers; DO NOT put Sodium Chlorite in metal containers Keep out of the reach of children
Storage: avoid direct exposure to sunlight and keep MMS in a cool, dry place, away from the reach of children. Scientists discovered that diluted acidified MMS will remain active for a week or more in a capped bottle as it just gradually weakens. A 4 oz. bottle of MMS (a solution of 28% sodium chlorite in distilled water) provides about 2700 drops of 9 mgs each.
Everyone should first do the Protocol 1000 for detoxification of the body as there is no better method of detoxification.
Disclaimer
The information provided is not a substitute for licensed professionals who can diagnose, treat, and give medical advice. This booklet informs people about an option that non-professional people sometimes use as experimental research. www.jimhumble.biz describes limited internal and external protocols. The wide use of chlorine dioxide and its descriptions do not and can not represent the practice of medicine. The user assumes all responsibility for the understanding and application of this presented material.
12
Jim Humble's Homepage with information on Master Mineral Solution or MMS, and more.
