Custom Design & Fabrication South LLC - Retired

Custom Design & Fabrication South LLC - Retired As of April 2021, I have retired.

CDFS provides custom Machine Work and Fabrication for Virginia Commonwealth University, and the medical research community world-wide.

Acrylic procedure box. The spaced panels are for dividers
11/20/2020

Acrylic procedure box. The spaced panels are for dividers

Heavy duty hangers for lead aprons. Headed to Bill Harris and VCU Radiology. Made from 6061 aluminum and I gave them a t...
11/01/2020

Heavy duty hangers for lead aprons. Headed to Bill Harris and VCU Radiology. Made from 6061 aluminum and I gave them a tumble in ceramic media for the finish.

One of my eCCi frames, assembled after anodizing.
10/21/2020

One of my eCCi frames, assembled after anodizing.

Ultrasound detector holders for VCU. Kinda like the smoke grey poly.
10/21/2020

Ultrasound detector holders for VCU. Kinda like the smoke grey poly.

Some sort of demolition box, made from 3/8" acrylic. Headed for UVA
02/24/2020

Some sort of demolition box, made from 3/8" acrylic. Headed for UVA

Breast compression plates for Oncology. Please don't ask what the holes are for...
07/11/2019

Breast compression plates for Oncology. Please don't ask what the holes are for...

3" tall blocks for patients to stand on for ankle x-ray's. Made from 1" Starboard 12" X 18". Put them together with 1/4-...
05/30/2019

3" tall blocks for patients to stand on for ankle x-ray's. Made from 1" Starboard 12" X 18". Put them together with 1/4-20 brass screws. Headed to a satellite VCU clinic.

Phantoms I made for UVA for image calibration. Made 4 of these. 12 layers of materials including 6 different thickenss o...
08/21/2018

Phantoms I made for UVA for image calibration. Made 4 of these. 12 layers of materials including 6 different thickenss of polycarbonate sheet, 5052 aluminum plate, and half hard copper sheet. Holes drilled in some sheets in patterns, slots and SS pins in one sheet. Each level is unique. Made brass corner posts with FH brass screws. Plates can be rotated for different imaging options.

Made a upper clamp bracket for an x-ray panel holder. Made from 6061 aluminum.
07/18/2018

Made a upper clamp bracket for an x-ray panel holder. Made from 6061 aluminum.

Some more procedure carts for VCU.  Made from 1 1/2" alum tubing. Tops are 1" acrylic with opening for test plates.
07/17/2018

Some more procedure carts for VCU. Made from 1 1/2" alum tubing. Tops are 1" acrylic with opening for test plates.

Some more splash guards for VCU. Made from 1/4" & 1/2" polycarbonate. Machined a slot down the center of the 1/2" and us...
07/17/2018

Some more splash guards for VCU. Made from 1/4" & 1/2" polycarbonate. Machined a slot down the center of the 1/2" and used Weldon 3 to cement the 1/4" piece in place then polished the edges to make them look nice.

3 FPI's ready for anodizing. There are a few acrylic pieces in the picture but everything else is 6061 aluminum. Not sho...
06/20/2018

3 FPI's ready for anodizing. There are a few acrylic pieces in the picture but everything else is 6061 aluminum. Not shown are the base plates and fluid cylinders. This one took a while LOL

Address

Petersburg, VA
23805

Telephone

+18042015471

Website

Alerts

Be the first to know and let us send you an email when Custom Design & Fabrication South LLC - Retired posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Practice

Send a message to Custom Design & Fabrication South LLC - Retired:

Share

Share on Facebook Share on Twitter Share on LinkedIn
Share on Pinterest Share on Reddit Share via Email
Share on WhatsApp Share on Instagram Share on Telegram