BioTech Services

03/11/2025

Register by your email to attend a webinar on "Unlocking the Power of Advanced CBC Parameters in Dengue Diagnosis" ☺️

https://www.sysmex-ap.com/minds-together-sysmex-knowledge-congregation-unlocking-the-power-of-advanced-cbc-parameters-in-dengue-diagnosis/

16/10/2025

New era for 𝗘𝗦𝗥 testing!
World’s one & only fully automated 𝗘𝗦𝗥 analyzer that follows all criteria of 𝗪𝗲𝘀𝘁𝗲𝗿𝗴𝗿𝗲𝗻 𝗠𝗲𝘁𝗵𝗼𝗱!

Westergren is the gold standard method for ESR testing & It's all criteria is given below:
1. Glass pipette with 200mm height
2. Inner diameter of pipette 2.55mm
3. 4:1 dilution with sodium citrate
4. 90° vertical position
5. Time: 60 minute
6. Temp. should between 18-25°C

Our 𝐑𝐑 𝐌𝐞𝐜𝐡𝐚𝐭𝐫𝐨𝐧𝐢𝐜𝐬 follows all criteria of westergren method. So, your confidence level will increase a lot when you will start use our 𝐑𝐑 𝐌𝐞𝐜𝐡𝐚𝐭𝐫𝐨𝐧𝐢𝐜𝐬 instrument 🥰

Model: Starrsed-NSTA
Brand: RR Mechatronics
Origin: Netherlands

14/10/2025

Freelite® assays play a pivotal role in accurate diagnosis, treatment monitoring, and disease management to provide a better patient outcome.

Read these patient cases which reinforce why Freelite assays have been trusted by the medical community worldwide for over 20 years. http://spr.ly/6180xb1Jg

13/10/2025

𝐒𝐲𝐬𝐦𝐞𝐱 𝐒𝐥𝐢𝐝𝐞 𝐏𝐫𝐞𝐩𝐚𝐫𝐚𝐭𝐢𝐨𝐧 𝐔𝐧𝐢𝐭 𝐰𝐢𝐭𝐡 𝐃𝐢𝐠𝐢𝐭𝐚𝐥 𝐈𝐦𝐚𝐠𝐢𝐧𝐠 𝐒𝐲𝐬𝐭𝐞𝐦!
It’s an automated system for creating blood smears and performing staining.
It produces consistent, high-quality slides for microscopic analysis.
These units automate the entire process from dispensing blood onto a slide to staining it, ensuring standardized and reproducible results by adjusting parameters like sample volume, speed, and spreader angle based on the blood's hematocrit (HCT) value. This reduces operator variability and improves diagnostic quality.

26/09/2025

Special Protein Test Analyzer

The Optilite assay menu includes tests for Immunoglobulins (IgG, IgA, IgM, IgD, IgE), Free Light Chains (Kappa, Lambda), Subclasses (IgG1, IgG2, IgG3, IgG4, IgA1, IgA2), Complement proteins, Specific proteins (Haptoglobin, Prealbumin, Lipoprotein(a), Rheumatoid Factor), and CNS assays (Low Level Albumin, IgA CSF, IgG CSF).
These assays run on the Optilite® analyser, a dedicated platform for special protein testing.

All assay panels:
Monoclonal Gammopathies
Immunoglobulins
Ig Subclasses
Complement
Central Nervous System Disorders
Renal Function
Specifc Proteins

26/09/2025

𝙊𝙥𝙩𝙞𝙡𝙞𝙩𝙚 𝙞𝙨 𝙖 𝙛𝙪𝙡𝙡𝙮 𝙖𝙪𝙩𝙤𝙢𝙖𝙩𝙚𝙙 𝙨𝙥𝙚𝙘𝙞𝙖𝙡 𝙥𝙧𝙤𝙩𝙚𝙞𝙣 𝙖𝙣𝙖𝙡𝙮𝙯𝙚𝙧 𝙨𝙮𝙨𝙩𝙚𝙢 𝙙𝙚𝙫𝙚𝙡𝙤𝙥𝙚𝙙 𝙗𝙮 𝙏𝙝𝙚 𝘽𝙞𝙣𝙙𝙞𝙣𝙜 𝙎𝙞𝙩𝙚 𝙂𝙧𝙤𝙪𝙥, 𝙞𝙣 𝙥𝙖𝙧𝙩𝙣𝙚𝙧𝙨𝙝𝙞𝙥 𝙬𝙞𝙩𝙝 𝙏𝙝𝙚𝙧𝙢𝙤 𝙁𝙞𝙨𝙝𝙚𝙧 𝙎𝙘𝙞𝙚𝙣𝙩𝙞𝙛𝙞𝙘, 𝙛𝙤𝙧 𝙪𝙨𝙚 𝙞𝙣 𝙙𝙞𝙖𝙜𝙣𝙤𝙨𝙩𝙞𝙘 𝙡𝙖𝙗𝙤𝙧𝙖𝙩𝙤𝙧𝙞𝙚𝙨.

𝙄𝙩 𝙪𝙨𝙚𝙨 𝙤𝙥𝙩𝙞𝙢𝙞𝙯𝙚𝙙 𝘽𝙞𝙣𝙙𝙞𝙣𝙜 𝙎𝙞𝙩𝙚 𝙖𝙨𝙨𝙖𝙮𝙨 𝙛𝙤𝙧 𝙨𝙥𝙚𝙘𝙞𝙖𝙡 𝙥𝙧𝙤𝙩𝙚𝙞𝙣𝙨, 𝙤𝙛𝙛𝙚𝙧𝙞𝙣𝙜 𝙚𝙛𝙛𝙞𝙘𝙞𝙚𝙣𝙘𝙮, 𝙖𝙘𝙘𝙪𝙧𝙖𝙘𝙮, 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤𝙢𝙖𝙩𝙞𝙤𝙣 𝙞𝙣 𝙥𝙧𝙤𝙘𝙚𝙨𝙨𝙚𝙨 𝙡𝙞𝙠𝙚 𝙨𝙖𝙢𝙥𝙡𝙚 𝙙𝙞𝙡𝙪𝙩𝙞𝙤𝙣, 𝙧𝙚𝙖𝙜𝙚𝙣𝙩 𝙡𝙤𝙖𝙙𝙞𝙣𝙜, 𝙖𝙣𝙙 𝙖𝙣𝙩𝙞𝙜𝙚𝙣 𝙚𝙭𝙘𝙚𝙨𝙨 𝙥𝙧𝙤𝙩𝙚𝙘𝙩𝙞𝙤𝙣.

𝙊𝙥𝙩𝙞𝙡𝙞𝙩𝙚 𝙞𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙙𝙞𝙖𝙜𝙣𝙤𝙨𝙩𝙞𝙘 𝙡𝙖𝙗𝙤𝙧𝙖𝙩𝙤𝙧𝙞𝙚𝙨 𝙛𝙤𝙧 𝙖 𝙬𝙞𝙙𝙚 𝙫𝙖𝙧𝙞𝙚𝙩𝙮 𝙤𝙛 𝙨𝙥𝙚𝙘𝙞𝙖𝙡 𝙥𝙧𝙤𝙩𝙚𝙞𝙣 𝙩𝙚𝙨𝙩𝙞𝙣𝙜, 𝙞𝙣𝙘𝙡𝙪𝙙𝙞𝙣𝙜 𝙩𝙝𝙚 𝙙𝙞𝙖𝙜𝙣𝙤𝙨𝙞𝙨 𝙖𝙣𝙙 𝙢𝙤𝙣𝙞𝙩𝙤𝙧𝙞𝙣𝙜 𝙤𝙛 𝙘𝙤𝙣𝙙𝙞𝙩𝙞𝙤𝙣𝙨 𝙡𝙞𝙠𝙚 𝙢𝙪𝙡𝙩𝙞𝙥𝙡𝙚 𝙢𝙮𝙚𝙡𝙤𝙢𝙖.
𝙄𝙩 𝙘𝙖𝙣 𝙖𝙡𝙨𝙤 𝙗𝙚 𝙪𝙨𝙚𝙙 𝙛𝙤𝙧 𝙘𝙝𝙖𝙧𝙖𝙘𝙩𝙚𝙧𝙞𝙯𝙞𝙣𝙜 𝙘𝙚𝙣𝙩𝙧𝙖𝙡 𝙣𝙚𝙧𝙫𝙤𝙪𝙨 𝙨𝙮𝙨𝙩𝙚𝙢 𝙙𝙞𝙨𝙤𝙧𝙙𝙚𝙧𝙨 𝙗𝙮 𝙖𝙣𝙖𝙡𝙮𝙯𝙞𝙣𝙜 𝙘𝙚𝙧𝙚𝙗𝙧𝙤𝙨𝙥𝙞𝙣𝙖𝙡 𝙛𝙡𝙪𝙞𝙙 (𝘾𝙎𝙁) 𝙥𝙧𝙤𝙩𝙚𝙞𝙣𝙨

28/08/2025

𝗠𝘂𝗹𝘁𝗶𝗽𝗹𝗲 𝗠𝘆𝗲𝗹𝗼𝗺𝗮: Signs & Symptoms

28/08/2025

Watch this short video for an overview of warning signs to diagnostic investigations of 𝗠𝘂𝗹𝘁𝗶𝗽𝗹𝗲 𝗠𝘆𝗲𝗹𝗼𝗺𝗮, so you can help improve earlier diagnosis!

07/08/2025

How many parameters you will get in 𝗥𝗲𝘁𝗶𝗰𝘂𝗹𝗼𝗰𝘆𝘁𝗲 𝗠𝗼𝗱𝗲 from a Hematology analyzer?
𝗦𝘆𝘀𝗺𝗲𝘅 𝗫𝗡-𝟱𝟱𝟬 gives you 𝟭𝟰 𝗽𝗮𝗿𝗮𝗺𝗲𝘁𝗲𝗿𝘀 from 𝗥𝗲𝘁𝗶𝗰𝘂𝗹𝗼𝗰𝘆𝘁𝗲 𝗠𝗼𝗱𝗲 and all parameters have clinical benefits!

The 𝗥𝗲𝘁𝗶𝗰𝘂𝗹𝗼𝗰𝘆𝘁𝗲 count reflects the erythropoietic activity of bone marrow and is thus useful in both diagnosing anemias and monitoring bone marrow response to therapy.

𝗟𝗶𝘀𝘁 𝗼𝗳 𝗽𝗮𝗿𝗮𝗺𝗲𝘁𝗲𝗿𝘀 𝗶𝗻 𝗥𝗲𝘁𝗶𝗰𝘂𝗹𝗼𝗰𝘆𝘁𝗲 𝗠𝗼𝗱𝗲:
1. RET #
2. RET%
3. IRF
4. LFR
5. MFR
6. HFR
7. RET-HE
8. DELTA-HE
9. HYPO-HE
10. HYPER-HE
11. RBC-HE
12. PLT-O
13. IPF #
14. IPF%

𝗖𝗹𝗶𝗻𝗶𝗰𝗮𝗹 𝗯𝗲𝗻𝗲𝗳𝗶𝘁𝘀 𝗼𝗳 𝘁𝗵𝗼𝘀𝗲 𝗽𝗮𝗿𝗮𝗺𝗲𝘁𝗲𝗿𝘀:

𝗥𝗲𝘁𝗶𝗰𝘂𝗹𝗼𝗰𝘆𝘁𝗲 # & %: A reticulocyte count checks to see if your bone marrow is making the right amount of red blood cells when old ones die off. If you have too few, your tissues may not get enough oxygen. If you have too many, you could be at risk for blood clots or other health concerns. Reticulocyte counts also help differentiate between different types of anemia, specifically identifying whether the anemia is due to decreased red blood cell production (hypoproliferative) or increased red blood cell destruction or loss (hyperproliferative).

𝐈𝐦𝐦𝐚𝐭𝐮𝐫𝐞 𝐑𝐞𝐭𝐢𝐜𝐮𝐥𝐨𝐜𝐲𝐭𝐞 𝐅𝐫𝐚𝐜𝐭𝐢𝐨𝐧: It can distinguish between hypo-proliferative (e.g., anemia of chronic disease), ineffective (e.g., some megaloblastic anemias), and hemolytic anemias (e.g., sickle cell anemia). For example, in hemolytic anemias, where red blood cell destruction is increased, the IRF will be high, indicating the bone marrow is working to compensate.
In contrast, in anemia of chronic disease, the IRF may be low, reflecting a suppressed bone marrow response.
It can help assess the effectiveness of bone marrow recovery in patients with aplastic anemia. For example, in patients with acute leukemia, a rising IRF after chemotherapy can indicate that the bone marrow is starting to produce new red blood cells.

𝐇𝐅𝐑, 𝐌𝐅𝐑 & 𝐋𝐅𝐑: High-fluorescence reticulocytes (HFR), middle-fluorescence reticulocytes (MFR), and low-fluorescence reticulocytes (LFR) are subpopulations of reticulocytes, which are immature red blood cells, identified by flow cytometry based on their RNA content and fluorescence intensity. The increase in HFR and MFR can be an early indicator of iron deficiency, even before a significant drop in hemoglobin levels.
HFR: Represents the most immature reticulocytes, with the highest RNA content, and its increase indicates a heightened bone marrow response to anemia.
MFR: Represents immature reticulocytes, with moderate RNA content, and its increase also indicates increased erythropoiesis.
LFR: Represents more mature reticulocytes, with lower RNA content.

𝐑𝐄𝐓-𝐇𝐞: (Reticulocyte Hemoglobin Equivalent) is a valuable tool in assessing iron status and erythropoiesis. It offers several clinical benefits, including early detection of iron deficiency, monitoring response to iron therapy, and potentially guiding treatment decisions in various conditions like anemia of chronic disease and nephrological disorders.
RET-He is particularly useful in populations like pregnant women, patients with kidney disease, and those with anemia of chronic disease, where iron deficiency can be a significant concern.
Unlike serum ferritin, RET-He is not affected by inflammation or infection, making it a more reliable indicator of iron status in these situations.

𝐑𝐁𝐂-𝐇𝐞: If increase RBC-He than it causes for Polycythemia, higher risk of blood clots & if RBC-He decreases than it causes for Fatigue, Shortness of breath and thalassemia.

𝐇𝐘𝐏𝐎-𝐇𝐞 & 𝐇𝐘𝐏𝐄𝐑-𝐇𝐞: HYPO-He and HYPER-He are hematological parameters that can be used to diagnose and monitor iron deficiency and other erythropoietic disorders. HYPO-He, the percentage of red blood cells with low hemoglobin content, is particularly useful in identifying iron deficiency, even in its subclinical stages. HYPER-He, the percentage of red blood cells with high hemoglobin content, can be indicative of other conditions like spherocytosis or liver disease.

𝐃𝐄𝐋𝐓𝐀-𝐇𝐞: Delta-He, calculated as the difference between Ret-He and RBC-He.
Delta-He a novel marker of inflammation predicting mortality and ESA(Erythropoiesis Stimulating Agent) response in peritoneal dialysis patients. It also serves as a sensitive indicator of iron availability for red blood cell production.

𝗣𝗟𝗧-𝗢: PLT-Optical methods can minimize interference from small RBCs, RBC fragments, and other particles that can falsely elevate platelet counts in traditional impedance method. PLT-O, often utilizing fluorescent staining and the reticulocyte (RET) channel, excels in differentiating platelets from interfering particles like small red blood cells (RBCs) and cell debris. This leads to more accurate platelet counts, especially in cases of low platelet counts or suspected interference.

𝗜𝗣𝗙 # & 𝗜𝗣𝗙 %: The immature platelet fraction (IPF) is a valuable biomarker in hematology, offering clinical benefits in diagnosing and managing thrombocytopenia, monitoring thrombopoietic recovery, and assessing cardiovascular risk. It helps differentiate between various causes of low platelet counts and can guide treatment decisions related to platelet transfusions and antiplatelet therapies.

31/07/2025

The Cobas c311 is an automated clinical chemistry analyzer that uses a combination of photometric, turbidimetric and ion-selective electrode (ISE) technologies to measure a wide range of analytes in patient samples.

𝐈𝐭 𝐚𝐥𝐬𝐨 𝐢𝐧𝐜𝐥𝐮𝐝𝐞𝐬 𝐜𝐥𝐨𝐭 𝐝𝐞𝐭𝐞𝐜𝐭𝐢𝐨𝐧 𝐚𝐧𝐝 𝐮𝐥𝐭𝐫𝐚𝐬𝐨𝐧𝐢𝐜 𝐦𝐢𝐱𝐢𝐧𝐠 𝐭𝐨 𝐞𝐧𝐬𝐮𝐫𝐞 𝐚𝐜𝐜𝐮𝐫𝐚𝐭𝐞 𝐚𝐧𝐝 𝐫𝐞𝐥𝐢𝐚𝐛𝐥𝐞 𝐫𝐞𝐬𝐮𝐥𝐭𝐬 𝐚𝐧𝐝 𝐫𝐞𝐝𝐮𝐜𝐞 𝐜𝐨𝐧𝐭𝐚𝐦𝐢𝐧𝐚𝐭𝐢𝐨𝐧.

Throughput:
Photometry: Up to 300 tests/hour.
ISE: Up to 480 tests/hour.

Sample Types: Serum, plasma, whole blood (for HbA1c), urine, cerebrospinal fluid (CSF), and supernatant (hemolysate).

Reagents: Up to 45 reagent positions (42 cassette positions and 3 channels for ISE).

Sample Input: 108 sample positions on a disk, with continuous random access & STAT interrupt capability.

Programmable parameters : 117 photometric, 3 ISE test & 8 calculated parameters

Serum Indices: 3 serum indices (lipemic, hemolytic, icteric).

𝗢𝘁𝗵𝗲𝗿 𝗙𝗲𝗮𝘁𝘂𝗿𝗲𝘀:

Reagent Handling: Barcoded cobas c reagent packs.

System Interface: RS 232 serial interface, bi-directional.

Water/Waste: Requires bacteria-free, deionized water.

Dimensions: 134 x 85 x 126 cm.

Weight: 270 kg (595 lb).

22/07/2025

The cobas e 411 analyzer is an automated, random-access, immunoassay analyzer from Roche Diagnostics.
It uses electrochemiluminescence (ECL) technology for both quantitative and qualitative in vitro assays.

This analyzer is designed for use in clinical laboratories to measure a wide range of analytes, including those for anemia, bone, cardiac, and tumor markers, critical care, fertility/hormones, and infectious diseases.

Detailed Specifications:

Technology: Electrochemiluminescence (ECL) for immunoassays.

Throughput: Up to 86 tests per hour.

Sample Types: Serum, plasma, and urine.

Reagents: 18 reagent positions.

Sample Handling: Disposable tips and cups for carryover-free pipetting, clot and liquid level detection (LLD).

Configuration: Available in both disk and rack systems.
Test Integrity: Carryover-free pipetting, clot and liquid level detection.

Other Features: Continuous random access, flexible STAT priority, automated sample rerun.

Dimensions (Rack System): 170 cm width, 95 cm depth, 109 cm height (with top cover open).
Weight (Rack System): 250 kg (551 lbs).

Sample Input/Output: 30 samples on the disk, 75 samples on 15 racks.

STAT Handling: Dedicated STAT port on the rack feeder.

Sample Barcode Types: Code 128, Codabar (NW 7), Interleaved 2 of 5, Code 39.

Sample Volume: 10 to 50 μl per test, depending on assay protocol.

Minimum Sample Volume: 600 μl (13mm tube), 1,000 μl (16mm tube), 200 μl (standard cup), 150 μl (with special setting).

Safety: Complies with emission and immunity requirements described in standard IEC 61326-2-6/ EN 61326-2-6.

The cobas e 411 analyzer is an automated, random-access, immunoassay analyzer from Roche Diagnostics.
It uses electrochemiluminescence (ECL) technology for both quantitative and qualitative in vitro assays.

This analyzer is designed for use in clinical laboratories to measure a wide range of analytes, including those for anemia, bone, cardiac, and tumor markers, critical care, fertility/hormones, and infectious diseases.

Detailed Specifications:

Technology: Electrochemiluminescence (ECL) for immunoassays.

Throughput: Up to 86 tests per hour.

Sample Types: Serum, plasma, and urine.

Reagents: 18 reagent positions.

Sample Handling: Disposable tips and cups for carryover-free pipetting, clot and liquid level detection (LLD).

Configuration: Available in both disk and rack systems.
Test Integrity: Carryover-free pipetting, clot and liquid level detection.

Other Features: Continuous random access, flexible STAT priority, automated sample rerun.

Dimensions (Rack System): 170 cm width, 95 cm depth, 109 cm height (with top cover open).
Weight (Rack System): 250 kg (551 lbs).

Sample Input/Output: 30 samples on the disk, 75 samples on 15 racks.

STAT Handling: Dedicated STAT port on the rack feeder.

Sample Barcode Types: Code 128, Codabar (NW 7), Interleaved 2 of 5, Code 39.

Sample Volume: 10 to 50 μl per test, depending on assay protocol.

Minimum Sample Volume: 600 μl (13mm tube), 1,000 μl (16mm tube), 200 μl (standard cup), 150 μl (with special setting).

Safety: Complies with emission and immunity requirements described in standard IEC 61326-2-6/ EN 61326-2-6.

18/07/2025

𝗧𝗵𝗲 𝗰𝗼𝗯𝗮𝘀 𝟰𝟬𝟬𝟬 𝗮𝗻𝗮𝗹𝘆𝘇𝗲𝗿 𝘀𝗲𝗿𝗶𝗲𝘀 𝗶𝘀 𝗮 𝗰𝗼𝗺𝗽𝗿𝗲𝗵𝗲𝗻𝘀𝗶𝘃𝗲 𝘀𝗲𝗿𝘂𝗺 𝘄𝗼𝗿𝗸 𝗮𝗿𝗲𝗮 𝘀𝗼𝗹𝘂𝘁𝗶𝗼𝗻 𝗳𝗼𝗿 𝗰𝗹𝗶𝗻𝗶𝗰𝗮𝗹 𝗰𝗵𝗲𝗺𝗶𝘀𝘁𝗿𝘆 𝗮𝗻𝗱 𝗶𝗺𝗺𝘂𝗻𝗼𝗰𝗵𝗲𝗺𝗶𝘀𝘁𝗿𝘆 𝘁𝗲𝘀𝘁𝗶𝗻𝗴 𝗶𝗻 𝗺𝗶𝗱 𝘃𝗼𝗹𝘂𝗺𝗲 𝗹𝗮𝗯𝘀 𝗼𝗿 𝘀𝗽𝗲𝗰𝗶𝗮𝗹𝗶𝘇𝗲𝗱 𝘁𝗲𝘀𝘁𝗶𝗻𝗴 𝗲𝗻𝘃𝗶𝗿𝗼𝗻𝗺𝗲𝗻𝘁𝘀.
𝗧𝗵𝗲 𝗰𝗼𝗯𝗮𝘀 𝟰𝟬𝟬𝟬 𝗮𝗻𝗮𝗹𝘆𝘇𝗲𝗿 𝘀𝗲𝗿𝗶𝗲𝘀 𝗰𝗼𝗻𝘀𝗶𝘀𝘁𝘀 𝗼𝗳 𝘁𝗵𝗲 𝗰𝗼𝗯𝗮𝘀 𝗰 𝟯𝟭𝟭 𝗮𝗻𝗮𝗹𝘆𝘇𝗲𝗿 𝗳𝗼𝗿 𝗰𝗹𝗶𝗻𝗶𝗰𝗮𝗹 𝗰𝗵𝗲𝗺𝗶𝘀𝘁𝗿𝘆 𝗮𝗻𝗱 𝘁𝗵𝗲 𝗰𝗼𝗯𝗮𝘀 𝗲 𝟰𝟭𝟭 𝗮𝗻𝗮𝗹𝘆𝘇𝗲𝗿 𝗳𝗼𝗿 𝗶𝗺𝗺𝘂𝗻𝗼𝗰𝗵𝗲𝗺𝗶𝘀𝘁𝗿𝘆.