28/09/2021
https://www.getglovez.com
PRODUCT SPECIFICATION
Latex Powder Free Examination Glove
PRODUCT CODE: LCPFS, LCPFM, LCPFL, LCPFXL
SECTION I : PRODUCT DESCRIPTION
1. 1 Type Latex Examination Glove, Powder Free, Online Single
Chlorinated, Non-sterile
1. 2 Material Natural High Grade Rubber Latex
1. 3 Color Natural
1. 4 Design and Feature Ambidextrous, palm textured, beaded cuff
1. 5 Powder No powder lubricant added
1. 6 Storage Condition The gloves shall maintain their properties when stored in a dry
condition. Avoid direct sunlight.
1. 7 Shelf-Life The gloves shall have shelf life of 5 years from the date of
manufacture with the above storage condition.
1. 8 Packing Style 100 pcs gloves x 10 dispensers x 1 carton
1. 9 Size Marking The size of gloves shall be marked in the check box on every
carton with black ink.
SECTION II : PERFORMANCE REQUIREMENTS
(Sampling Plan – ISO 2859 Single Normal)
# Characteristics Inspection Acceptable Reference Standard Level Quality Level
2.1 Dimensions S2 4.0 ASTM D3578-05 (2015)
2.2 Physical Properties S2 4.0 ASTM D3578-05 (2015)
2.3 Freedom from Holes GI 1.5 In-house practice (Air Pump Test)
2.4 Visual Defects:
(i) Major Visual GI 2.5 In-house practice
(ii) Minor Visual 4.0
2.5 Packaging Defects:
GI ** (i) Regulatory
GI 4.0 In-house practice (ii) Visual
S2 4.0 (iii) Critical (incl. Gloves Counting)
2.6 Powder Free Residue N=5 -
ASTM D3578-05 (2015)
ASTM D6124-06 (2011)
2.7 Mix Size / Mix Glove / Mix Hand Not Allowed
**Unacceptable at any level
Page 1 of 2
SECTION III: PERFORMANCE SPECIFICATION
3.1 Dimensions
Description Size Standard
Length (mm) All Sizes Min 240
XS 76 +/- 3
S 84 +/- 3
Palm Width (mm) M 94 +/- 3
L 105 +/- 3
XL 113 +/- 3
Finger: 0.11 +/- 0.02
Thickness (mm) All Sizes (Typical value: 0.10 – 0.13)
*single wall Palm: 0.10 +/- 0.02
(Typical value: 0.09 – 0.11)
3.2 Physical Properties
Description
Standard
Before Aging After Aging
Elongation at Break (%) Min 650 Min 500
(Typical value: 650 – 750) (Typical value: 500 – 600)
Tensile Strength (MPa) Min 18 Min 14
(Typical value: 18 – 22) (Typical value: 14 – 18)
3.3 Freedom from Holes
The sample size and allowable number of non-conforming gloves in the samples shall be
determined in accordance to Sampling Plan ISO 2859-1Single Normal using inspection and
acceptable quality level as stated in Section II: Performance Requirements.
3.4 Visual Inspection
The sample size and allowable number of non-conforming gloves in the samples for both
major and minor defects shall be determined in accordance to Sampling Plan ISO 2859-1
Single Normal using inspection and acceptable quality level as stated in Section II:
Performance Requirements.
3.5 Packaging Defects
The Sample size and allowable number of non-conforming in the sample for regulatory,
visual and critical packaging defects shall be determined in accordance to Sampling Plan ISO
2859-1 Single Normal using inspection and acceptable quality level as stated in Section II:
Performance Requirement (Gloves Counting = 100 pcs by weight per Dispenser).
3.6 Powder Free Residue
Maximum 2 mg per glove
