Premier Autowire

Premier Autowire Providing North Georgia the one stop shop for all your performance automotive needs!

We love some Concept One parts!
10/16/2025

We love some Concept One parts!

We got lucky yesterday while doing some pulls because or new friend was at the right place at the right time to get the...
09/02/2025

We got lucky yesterday while doing some pulls because or new friend was at the right place at the right time to get these sick shots! 76mph and we know she wants to go faster! I think we’ll hit 80 before the seasons over

Pt. 6 Riding into the sunset. Launching this boat for the first time was a little surreal. Three years in the making, lo...
07/26/2025

Pt. 6 Riding into the sunset. Launching this boat for the first time was a little surreal. Three years in the making, long days, all nighters and more than a couple of good friends made this a reality. It all started when I stayed up all night to help finish his boat for his wedding the next day. At the same time another friend had this boat and our dearly departed friend Joe Polacky was helping him rebuild the hull. Unfortunately, later that year Joe passed away unexpectedly leaving friends and family devastated and this project ultimately got set aside with no really plans to complete it. We knew it would be a shame to see all of Joe’s hard work rot away so when the opportunity to buy the boat came up I had to jump on it and finish the project to make him proud. Of course we needed to make sure he was represented on the boat before its maiden voyage so from now on he’ll always be riding shotgun.

Pt. 5 The Electrical System. Everyone knows we love our Motorsport wiring, so it seemed appropriate to make sure this bo...
07/24/2025

Pt. 5 The Electrical System. Everyone knows we love our Motorsport wiring, so it seemed appropriate to make sure this boat got the full milspec treatment! The materials used on this project will provide great reliability that may outlast the boat itself. Concentric twisting a harness adds significant flexibility to the harness as well as provides the smaller possible cross section. By using DR-25 and molded boots we are able to seal the electrical circuits away from sources of moisture and abrasion. Finally, by adopting the use of quality Milspec and Deutsch connectors we have an easily serviceable boat, no need to disconnect 15 circuits to pull an engine when you’re just one connector away!

Pt 4. Initially we weren’t sure if we’d be able to have rear seats when rigging up the boat. Without having the fuel ta...
07/24/2025

Pt 4. Initially we weren’t sure if we’d be able to have rear seats when rigging up the boat. Without having the fuel tanks installed we had an unknown amount of space to work with. Fortunately the fuel tanks nearly completely fit under their respective gunnels and allowed us to fit in a really nice rear bench seat from we made mounts out of 3/4” sanded plywood that were then sealed with laminating resin then glassed into the hull offering additional strength and some small storage compartments in the boat.

Pt 3. When we got this boat it had a fresh jet rebuild but after some consideration we decided to add a Jetaway from fo...
07/22/2025

Pt 3. When we got this boat it had a fresh jet rebuild but after some consideration we decided to add a Jetaway from for some added safety as well as a new loader that’s better for our application. In the future we’ll be going back in to add an inducer to help with some cavitation issues.

Pt. 2 engine transformation! From a 427 to a 498 this engine went together beautifully. -4.320” bore-4.250” stroke-Alumi...
07/21/2025

Pt. 2 engine transformation! From a 427 to a 498 this engine went together beautifully. -4.320” bore
-4.250” stroke
-Aluminum heads
-Forged crank and rods
-Pop up pistons
-Roller cam
-Solid lifters
-Rocker stud girdles
-High volume oil pump
-Marine oil pan
-Tunnel ram with two 750cfm Holley carbs
-MSD ready to run distributor
-Jet Boat Performance engine plates

Machine work by
-Line honed
-Bored and Honed
-Square decked
-Crank balanced
-Jet washed

Well with great excitement it’s time for us to reveal the Top Secret shop project! It’s been three years in the works b...
07/21/2025

Well with great excitement it’s time for us to reveal the Top Secret shop project! It’s been three years in the works but we are finally getting close to the goal post! Keep an eye open over the next couple days to see more pictures of this projects progress Couldn’t have done it without there to help every step of the way

Making connectors for parts that don’t exist. Couple more of these before the is ready to go!
02/03/2025

Making connectors for parts that don’t exist. Couple more of these before the is ready to go!

Before and after. While I don’t love going behind other people’s work, it will be worth it to have this harness tester ...
01/15/2025

Before and after. While I don’t love going behind other people’s work, it will be worth it to have this harness tester set up!

Address

110 Malala Drive
Dawsonville, GA
30534

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm
Saturday 9am - 2pm

Website

Alerts

Be the first to know and let us send you an email when Premier Autowire posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Practice

Send a message to Premier Autowire:

Shortcuts

Share

Share on Facebook Share on Twitter Share on LinkedIn
Share on Pinterest Share on Reddit Share via Email
Share on WhatsApp Share on Instagram Share on Telegram