Vilex Reimagining Foot & Ankle

🦶 Redemption✅ The REDEMPTIONᵀᴹ Midfoot Nails and Beams System has been designed to address the unique demands of advance...
02/13/2026

🦶 Redemption

✅ The REDEMPTIONᵀᴹ Midfoot Nails and Beams System has been designed to address the unique demands of advanced midfoot reconstruction. This system focuses on treating cases such as neuropathic deformity requiring arthrodesis of the medial and lateral columns, with or without corrective osteotomies.

Learn More ℹ️ vilex.com/redemption

🦶 ALPHALOK™ RECONBuilt for versatility, the ALPHALOK™ RECON Plating System delivers:• Low-profile 1.3mm titanium plates....
02/12/2026

🦶 ALPHALOK™ RECON

Built for versatility, the ALPHALOK™ RECON Plating System delivers:

• Low-profile 1.3mm titanium plates.
• Polyaxial ±15° locking technology.
• Anatomy specific options for fore and midfoot reconstruction.

🔗 Learn more at vilex.com/alphalok-recon

02/11/2026

♠️♥️ Welcome to Fabulous Las Vegas ♦️♣️

Vilex is excited to share that we will be attending ACFAS 2026 in Las Vegas! 👏

🗓️ February 24 - 26, 2026

We'll see you there. 👀

ℹ️ vilex.com/

| American College of Foot and Ankle Surgeons

OPTIX™ H3 Patient Specific Instrumentation System is a patient specific surgical planning and instrumentation to assist ...
02/10/2026

OPTIX™ H3 Patient Specific Instrumentation System is a patient specific surgical planning and instrumentation to assist in the positioning of total ankle replacement components intraoperatively, and in guiding bone cutting.

Through the combination of 3D engineering and the patient’s own CT scan, a patient-specific preoperative plan is developed and tailored to fit surgeon preferences. Implant sizing and alignment are determined using the patient’s anatomic landmarks, and DuraForm® PA (nylon) Preoperative Navigation Cut Guides are then created which set resection guide locations.

1️⃣ Reduced Surgical Procedural Complexity
2️⃣ Decreased Operating Time
3️⃣ Rapid 3D Printing Technology - From CT Scan to Surgery in as little as 4 weeks.

Learn More ℹ️ vilex.com/hintermann-series-h3

REDEMPTIONᵀᴹ DUO Radiolucent Targeting Armℹ️ Key Features1️⃣ 𝗣𝗿𝗼𝘅𝗶𝗺𝗮𝗹 𝗘𝘅𝘁𝗲𝗻𝗱𝗲𝗿✅ Precise Proximal Screw Placement for 250...
02/09/2026

REDEMPTIONᵀᴹ DUO Radiolucent Targeting Arm

ℹ️ Key Features

1️⃣ 𝗣𝗿𝗼𝘅𝗶𝗺𝗮𝗹 𝗘𝘅𝘁𝗲𝗻𝗱𝗲𝗿
✅ Precise Proximal Screw Placement for 250mm and 300mm Nails

2️⃣ 𝗖𝗼𝗹𝗼𝗿 𝗖𝗼𝗱𝗲𝗱 𝗠𝗮𝗿𝗸𝗶𝗻𝗴𝘀
✅ Increased Ease of Use

3️⃣ 𝗟𝗼𝗰𝗸𝗶𝗻𝗴 𝗖𝗮𝗺𝘀
✅ Retain DTS Guide Sleeves During Targeter and Patient Positioning

4️⃣ 𝗢𝗯𝗹𝗶𝗾𝘂𝗲 𝗦𝗰𝗿𝗲𝘄 𝗚𝘂𝗶𝗱𝗲
✅ Targeted Placement of Oblique Supplementary Screws or Beams
✅ Precisely Lock in Subtalar Compression without Nail Interference
✅ Multiple Trajectory Angle Options to Obtain Optimal Bone Purchase

5️⃣ 𝗗𝗶𝘀𝘁𝗮𝗹 𝗧𝗮𝗿𝗴𝗲𝘁𝗶𝗻𝗴 𝗔𝗿𝗺
✅ Precisely Locks into Place in 90ᵒ Degree Increments

6️⃣ 𝗖𝗼𝘂𝗻𝘁𝗲𝗿𝘀𝗶𝗻𝗸 𝗚𝗿𝗼𝗼𝘃𝗲𝘀
✅ High Visibility Countersink Indicators (5mm Increments)

7️⃣ 𝗥𝗮𝗱𝗶𝗼𝗹𝘂𝗰𝗲𝗻𝘁 𝗛𝗲𝗲𝗹 𝗖𝘂𝗽
✅ Aid in Stability and Positioning
✅ No X-Ray Interference

8️⃣ 𝗘𝘅𝘁𝗲𝗿𝗻𝗮𝗹 𝗖𝗼𝗺𝗽𝗿𝗲𝘀𝘀𝗶𝗼𝗻
✅ Up to 34mm of External Compression (Optional)

Learn More 💻 vilex.com/redemption-duo-hindfoot-nail

🦶 NITINEXNITINEXᵀᴹ Staples are sterile packaged, low-profile, bone fixation appliances intended to provide continuous co...
02/06/2026

🦶 NITINEX

NITINEXᵀᴹ Staples are sterile packaged, low-profile, bone fixation appliances intended to provide continuous compression throughout the bone healing process. NITINEXᵀᴹ Staples are two-legged, compression staples made of a shape memory nickel titanium alloy, Nitinol. Designed with barbed and tapered legs, paired with a wide bridge, NITINEXᵀᴹ Staples retain compression even through repetitive loading.

The NITINEXᵀᴹ Staple System offers staples in nine different size options, ranging from 8mm to 30mm to address a variety of fracture and fusion immobilizations in the hand and foot. The NITINEXᵀᴹ Staple System packaging includes a staple of each available size along with all the easy-to-use instruments for implantation.

Learn More ℹ️ vilex.com/nitinex

🦶 DYNEX | External Fixation SystemDYNEX combines powerful innovation with classic Illizarov external fixation components...
02/03/2026

🦶 DYNEX | External Fixation System

DYNEX combines powerful innovation with classic Illizarov external fixation components and principals to deliver unlimited external fixation all in one comprehensive system.

The DYNEX External Fixation System is designed to address stabilization of fractures and osteotomies, rear and midfoot arthrodesis, adult and pediatric leg lengthening, and correction of bone deformity in upper and lower extremities.

Learn More ℹ️ vilex.com/dynex

01/28/2026

🚨 ARTEMISᵀᴹ MIBS | Surgical Technique Animation

ARTEMISᵀᴹ MIBS provides comprehensive burr and implant options for the minimally invasive, percutaneous procedures and arthrodesis in the foot and ankle; specifically for Hallux Valgus. The ARTEMISᵀᴹ MIBS system includes a targeting guide for fast, reproducible results.

1️⃣ Constant Pitch Screws

- 3.0mm Screws offered in 12mm-50mm Lengths, 2mm increments.

- 4.0mm Screws offered in 16mm-70mm Lengths, in 2mm increments

- 45ᵒ Chamfer Head to reduce soft tissue irritation.

- Cannulation for use with Cobalt Chrome Guide Wires to allow for precise placement with enhanced pull out strength

2️⃣ Enhanced Stability & Translation

- Targeter with slotted canal hook.

3️⃣ Precise Capital Fragment Rotation

- Scaled and measured rotation of the capital fragment.

4️⃣ Adjustable Screw Trajectory

- Adjustable Targeting Arch for angle customization and Drill Guides.

Learn More ℹ️ vilex.com/artemis-mibs

🦶 Hintermann Series H31️⃣ Tibial ComponentLow profile anterior shield is designed to:- Provide rotational stability of t...
01/26/2026

🦶 Hintermann Series H3

1️⃣ Tibial Component

Low profile anterior shield is designed to:

- Provide rotational stability of tibial component.

Pyramidal peaks for anchoring in subchondral bone thus increasing stability in translation and rotation.

Sizes 1 – 6 in right or left orientation.

2️⃣ Poly (PE) Inlay

Ultra-high molecular weight polyethylene, UHMWPE.

Unconstrained rotary gliding (sagittal and fontal plane) on the flat tibial surface.

High congruency with the metal surfaces of both tibial and talar components.

Large contact area with the tibial and talar components designed to provide:

- Minimized contact stresses.
- Minimized wear.
- Intrinsic stability against eversion-inversion forces.

Sizes 1 – 6 in thicknesses of 5, 6, 7 and 9 mm.

3️⃣ Talar Component

Anatomical shape (conical surface) designed to:

- Allow physiological talar motion.
- Minimize medial ligament stresses.

Medial and lateral rims designed to guide movement of the PE inlay.

Anterior pegs designed to improve sagittal stability and positioning.

A flat cut talar option is available for patients with lower bone stock.

Talar Component:
- Sizes 1 – 6 in right or left orientation

Flat Cut Talar Component:
- Sizes 1 – 5 in right or left orientation.

Learn More ℹ️ vilex.com/hintermann-series-h3

🚨 ARTEMISᵀᴹ MIBS...Our Brand New ARTEMISᵀᴹ MIBS Minimally Invasive Bunion System is available now! 👏ARTEMISᵀᴹ MIBS provi...
01/23/2026

🚨 ARTEMISᵀᴹ MIBS...

Our Brand New ARTEMISᵀᴹ MIBS Minimally Invasive Bunion System is available now! 👏

ARTEMISᵀᴹ MIBS provides comprehensive burr and implant options for the minimally invasive, percutaneous procedures and arthrodesis in the foot and ankle; specifically for Hallux Valgus. The ARTEMISᵀᴹ MIBS system includes a targeting guide for fast, reproducible results.

1️⃣ Constant Pitch Screws

- 3.0mm Screws offered in 12mm-50mm Lengths, 2mm increments.

- 4.0mm Screws offered in 16mm-70mm Lengths, in 2mm increments

- 45ᵒ Chamfer Head to reduce soft tissue irritation.

- Cannulation for use with Cobalt Chrome Guide Wires to allow for precise placement with enhanced pull out strength

2️⃣ Enhanced Stability & Translation

- Targeter with slotted canal hook.

3️⃣ Precise Capital Fragment Rotation

- Scaled and measured rotation of the capital fragment.

4️⃣ Adjustable Screw Trajectory

- Adjustable Targeting Arch for angle customization and Drill Guides.

Learn More ℹ️ vilex.com/artemis-mibs

🦶 ARTEMISᵀᴹ Zadex | Minimally Invasive Zadek OsteotomyThe ARTEMISᵀᴹ Zadex System provides comprehensive implant options ...
01/22/2026

🦶 ARTEMISᵀᴹ Zadex | Minimally Invasive Zadek Osteotomy

The ARTEMISᵀᴹ Zadex System provides comprehensive implant options for the minimally invasive, percutaneous fracture fixation, osteotomies, reconstruction procedures and arthrodesis in the foot and ankle; specifically for the treatment of insertional Achilles Tendinopathy.

1️⃣ Dual Screw Strategy - For treatment of insertional Achilles Tendinopathy

- Dorsal Partially Threaded Compression

- Plantar Fully Threaded Non-Compression

2️⃣ Percutaneous Approach

- Targeted adjustable wedge between 7mm - 16mm

3️⃣ Chamfer Head Screws

- Chamfer Head 6.5 screw with 30ᵒ Chamfer

Learn More ℹ️ vilex.com/artemis-zadex

🦶 ALPHALOK | AnkleFXThe ALPHALOKᵀᴹ ANKLEFX Plating System provides a comprehensive range of anatomically contoured plate...
01/08/2026

🦶 ALPHALOK | AnkleFX

The ALPHALOKᵀᴹ ANKLEFX Plating System provides a comprehensive range of anatomically contoured plates specifically designed for the reconstruction of the tibia and fibula. ALPHALOKᵀᴹ ANKLEFX features low-profile 1.3mm Titanium Alloy Ti6AI4V plating designed to reduce soft tissue irritation.

Learn More ℹ️ vilex.com/alphalok-anklefx

Address

111 Moffit Street
McMinnville, TN
37110

Alerts

Be the first to know and let us send you an email when Vilex posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Practice

Send a message to Vilex:

Share

Share on Facebook Share on Twitter Share on LinkedIn
Share on Pinterest Share on Reddit Share via Email
Share on WhatsApp Share on Instagram Share on Telegram