faceless fx

18/12/2021

It begins. 5 places left on the list!

DM me for details. They're going fast!

Or see a few posts back 😊

09/12/2021

Parts are here!

It's go time on these. 😊

See previous post for more.

So here's the current plan. Labels are a mock up but that's where they're going.

No "faceless fx" No pedal name.

Different 😉 Mk1 type.

                     
#エフェクター 
                       

09/12/2021

So this is now happening!

I have some spaces left on the hard wedge Mk1 type. But these will be... different.

So here's the current plan. Labels are a mock up but that's where they're going.

No "faceless fx" No pedal name.

I've made the Mk1 labels and logo too small on the pic but placement is accurate. See the Supa mock up for what I reckon the size should be.

Roughly 10 places left on the Mk1 type pedal. All the Supas went straight away.

It's a £100 deposit to get on the list. £399 total. Contact me for details on pricing and ordering.

I'm now well enough that I can get back to building these.

I have a feeling these will now be snapped up soon. The feelers have gone out to most of the right people!

These are going to be very special indeed.

Volume and Fuzz. The Fuzz control will work differently to a Mk1 and the circuit has been changed a lot.

More gain. More sizzle on tap. They're crazy 😊 If you want them to be 😉

contact on here is best. Email currently working through so I might miss you.

Let's go!

                     
#エフェクター 
                       

23/11/2021

10/10/2021

We all have mental health.

Finding help for negative mental health is not easy.

Your peers and family might not understand your issues. They probably can't.

I'm happy to say I was finally able to access help with the support of my family.

I had to hit rock bottom and then some for me to be ready and willing to accept help.

Over the past few months, perhaps longer, I have caused enough destruction to last many lifetimes for my family.

I've been within an inch of my life too many times.

I've tried to do it myself too many times.

Please, if you have a problem tell someone. They might not understand it but it's a start on what could otherwise be a long, dangerous and destructive road.

Nobody should suffer. Help is available.

To all my customers - I will be back in the near future. I need this time away in order to get well and to he able to get back to building.

I'm not reading my work emails as it would be detrimental to my recovery and thus my work.

I value my work and cherish all my customers.

If you're part of the fuzz community, please feel free to spread this message.

I'll be back better than ever 💛🤟

13/09/2021

So here's the current plan. Labels are a mock up but that's where they're going.

No "faceless fx" No pedal name.

I've made the Mk1 labels and logo too small on the pic but placement is accurate. See the Supa mock up for what I reckon the size should be.

As there's only 25 of these in total I'll leave the decision up to you on k***s.

I like the chicken heads for the Mk1s. I also like the circular, ribbed for her pleasure k***s on the Supa/MkII.

What do you reckon? We've got scope and I'm completely open to suggestions.

                     
#エフェクター 
                       

12/09/2021

Charity shop find by my dad. In Suffolk! Lovely gift.

Joseph Wright. I walk by his house (in the 1700s) regularly.

Swipe for painting of Mr and Mrs [name of the crescent I live on] Never seen that one before.

If you're not aquatinted, take a look at the cumbersomely titled "An Experiment on a Bird in the Air Pump". National Gallery. 🙂

12/09/2021

At my dad's house for another week or so.

He just brought this out. I apparently build it for him. Date says over 11 years ago.

Graphic is a detail from Guernica.

Silicon Fuzz Face. No mojo except them ZT43 ain't new and it's got a CTS volume pot for some reason. Two trimmers. Wiring not the neatest.

Love those k***s though!

A bit of faceless past.

                     
#エフェクター 
                       

09/09/2021

UV printing jig to make the printing surfaces level.

To be minimally printed in yellow. Not even "faceless fx" on them. Just the faceless logo and control labels More and Sore.

There's a waiting list for these. See a few posts back. Only one MkII/Supa left. Around 15 Mk1 (type - more like the De Sade) left.

DM or email tim@facelessfx.co.uk for details.

                     
#エフェクター 
                       

04/08/2021

Um. Ahem.

Yep that's pink. Magic painter strikes again.

02/08/2021

The fuschia's bright 🤗